WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Mazda Mazda6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

757 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Labels and manuals are shown. Show all

Bulletins, newest first
01-016-14-29382017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE A MRCC MALFUNCTION WHEN DRIVING LONG DISTANCES WITH MRCC SET. INSTRUMENT CLUSTER INFORMATION DISPLAY SHOWS “FOW INSPECTION REQUIRED” AND DTC C1A67:78 (RADAR SENSOR AXIS IS DEVIATED) IS STORED. THIS IS CAUSED BY MRCC NO OBSTACLE DETECTION DURING A LONG DRIVE.
01-016-14-2938A2017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE A MRCC MALFUNCTION WHEN DRIVING LONG DISTANCES WITH MRCC SET. INSTRUMENT CLUSTER INFORMATION DISPLAY SHOWS “FOW INSPECTION REQUIRED” AND DTC C1A67:78 (RADAR SENSOR AXIS IS DEVIATED) IS STORED. THIS IS CAUSED BY MRCC NO OBSTACLE DETECTION DURING A LONG DRIVE.
01-009-14-29092017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE A ROUGH IDLE WITH THE MIL ON AND DTC P0015 / P0524 STORED IN MEMORY. • P0015:00 - EXHAUST CMP TIMING OVER-RETARDED • P0524:00 - ENGINE OIL PRESSURE TOO LOW THIS IS CAUSED BY A DROP IN ENGINE OIL PRESSURE DUE TO A PIECE OF FOREIGN OBJECT STUCK ON THE OIL PUMP PRESSURE RELIEF VALVE OR OCV. THE TEMPORARY ENTRY OF THE FOREIGN OBJECT TRIGGERS A MIL ILLUMINATION, BUT ROUGH IDLE WILL NOT BE PRODUCED UNTIL A LATER TIME.
01-010-14-28962017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0191:00 (FUEL PRESSURE SENSOR CIRCUIT RANGE/PERFOR-MANCE PROBLEM) STORED IN MEMORY. THIS IS CAUSED BY THE HIGH PRESSURE FUEL PUMP NOT GENERATING THE TARGET FUEL PRESSURE (DUE TO A MANUFACTURING ERROR OF THE INNER PARTS). TO CORRECT THE PROBLEM, PRODUCTION CONTROL HAS BEEN IMPROVED.
01-010-14-2896A2017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0191:00 (FUEL PRESSURE SENSOR CIRCUIT RANGE/PERFOR-MANCE PROBLEM) STORED IN MEMORY. THIS IS CAUSED BY THE HIGH PRESSURE FUEL PUMP NOT GENERATING THE TARGET FUEL PRESSURE (DUE TO A MANUFACTURING ERROR OF THE INNER PARTS). TO CORRECT THE PROBLEM, PRODUCTION CONTROL HAS BEEN IMPROVED.
05-005-14-2902B2017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY.•P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON•P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON•P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON•P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ONTHE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER.•P0780:00 - GEAR SHIFTING MALFUNCTION•P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTIONTHIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
05-005-14-2902C2017-05-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY.•P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON•P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON•P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON•P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ONTHE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER.•P0780:00 - GEAR SHIFTING MALFUNCTION•P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTIONTHIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
01-010-14-2896B2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0191:00 OR DTC P0192:00 STORED IN MEMORY. DTC P0191:00: FUEL PRESSURE SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEM (EXCEPT 2014 MAZDA3) DTC P0192:00: FUEL PRESSURE SENSOR CIRCUIT LOW INPUT (2014 MAZDA3) THIS IS CAUSED BY THE HIGH PRESSURE FUEL PUMP NOT GENERATING THE TARGET FUEL PRESSURE (DUE TO A MANUFACTURING ERROR OF THE INNER PARTS). TO CORRECT THE PROBLEM, PRODUCTION CONTROL HAS BEEN IMPROVED.
05-005-14-2902D2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY.•P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON•P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON•P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON•P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ONTHE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER.•P0780:00 - GEAR SHIFTING MALFUNCTION•P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION. NOTE: THIS SERVICE INFORMATION IS ALSO APPLICABLE IF DTC P0780:00 IS STOREED INDEPENDENTLY. THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
09-020-14-2913A2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE SYMPTOMS MENTIONED BELOW, WHICH CAN BE FIXED WITH THE LATEST SOFTWARE UPDATE (VERSION 10.852 OR LATER).• VEHICLE ICON JUMPS AROUND OR VIBRATES. CAUTION: DO NOT USE THE FACTORY RESET FOR RETAIL VEHICLES. OTHERWISE, PERSONAL SETTINGS (SUCH AS DISPLAY AND SOUND ADJUSTMENTS) WILL BE LOST, INCLUDING FAVORITES INFORMATION.
01-001-14-2868D2017-05-03. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS:1. SYMPTOM (MAZDA6 ONLY)A.WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING.B.THE MASTER WARNING LIGHT WILL BE ILLUMINATED. C.DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEM-ORY.
05-005-14-29022017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY. • P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON • P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON • P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON • P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ON THE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER. • P0780:00 - GEAR SHIFTING MALFUNCTION • P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
05-005-14-2902A2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT AND AUTOMATIC TRANSAXLE WARNING LIGHT ON WITH DTC P0842, P0847, P0872 AND/OR P0877 STORED IN THE TCM MEMORY. • P0842:00 - OIL PRESSURE SWITCH NO. 1 (OIL PRESSURE SWITCH B) STUCK ON • P0847:00 - OIL PRESSURE SWITCH NO. 2 (OIL PRESSURE SWITCH A) STUCK ON • P0872:00 - OIL PRESSURE SWITCH NO. 3 (OIL PRESSURE SWITCH A) STUCK ON • P0877:00 - OIL PRESSURE SWITCH NO. 4 (OIL PRESSURE SWITCH B) STUCK ON THE DTC P0780 AND/OR P1738 MAY ALSO BE STORED TOGETHER. • P0780:00 - GEAR SHIFTING MALFUNCTION • P1738:00 - AUTOMATIC TRANSAXLE INTERNAL MALFUNCTION THIS IS CAUSED BY THE OIL PRESSURE SWITCH A AND/OR B AT THE CONTROL VALVE BODY TEMPORARILY OR PERMANENTLY GETTING STUCK DUE TO CONTAMINATION ENTERING THE PASSAGE. TO CORRECT THE PROBLEM, SOME MASS PRODUCTION CHANGES HAVE BEEN IMPLEMENTED TO REDUCE CONTAMINATION AND IMPROVE THE DTC DIAGNOSTIC LOGIC.
01-001-14-2868B2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED.C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.
05-002-14-28942017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXHIBIT THE ATX FAIL-SAFE FUNCTION WORKING WITH THE FOLLOWING SYMPTOMS: • THE VEHICLE SPEED DOES NOT INCREASE WITH ENGINE SPEED • THE ATX DOES NOT SHIFT UP OR DOWN AS EXPECTED. THE CONDITION MAY NOT ALWAYS BE ABLE TO BE REPRODUCED AND DTCS MAY NOT BE STORED WHEN THE VEHICLE IS BROUGHT IN. FOREIGN MATERIAL (IRON PARTICLES IN THE ATF) MAY ENTER THE ATX VALVE BODY AND CAUSE A TEMPORARY MALFUNCTION OF THE VALVE BODY AND/OR SENSOR (ATX FAIL-SAFE FUNCTION ACTIVATED). THE FAIL-SAFE FUNCTION IS CANCELED WITHOUT DTCS RECORDED IF THE MALFUNCTION GOES AWAY AND DOES NOT OCCUR AGAIN AT THE NEXT DRIVE CYCLE. FAIL-SAFE FUNCTION OPERATION: • IF A TECHNICAL FAULT IS DETECTED IN THE ATX BY THE MALFUNCTION DETECTION FUNCTION, THE FAIL-SAFE FUNCTION LIMITS THE ATX CONTROL (INHIBITS SOME GEARS OR SHIFT DOWN FUNCTIONS). • EVEN IN CASE OF AN ATX MALFUNCTION, THE FAIL-SAFE FUNCTION ALLOWS MINIMUM VEHICLE DRIVEABILITY.
01-001-14-2868C2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED.C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.
01-001-14-28682017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.2. SYMPTOM (MAZDA3 AND MAZDA6) A. WARNING MESSAGE “BATTERY MANAGEMENT SYSTEM INSPECTION REQUIRED” AND THEN "CHARGING SYSTEM MALFUNCTION/ENGINE COULD STOP UNEXPECTEDLY” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY AFTER DRIVING IN THE RAIN. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. THE MAZDA6 WARNING INDICATOR LIGHT AND WARNING MESSAGES ARE SHOWN BELOW: C. THE FOLLOWING DTCS ARE STORED IN PCM MEMORY: • DTC P1794:00 - CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION • DTC P2502:00 - GENERATOR SYSTEM: MALFUNCTION IN VOLTAGE GENERATED BY GENERATOR
01-001-14-2868A2017-04-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY EXPERIENCE ONE OF THE FOLLOWING TWO SYMPTOMS: 1. SYMPTOM (MAZDA6 ONLY) A. WARNING MESSAGE “I-ELOOP INSPECTION REQUIRED” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY WHILE DRIVING. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. C. DTC P1794:00 (CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION) WILL BE STORED IN PCM MEMORY.2. SYMPTOM (MAZDA3 AND MAZDA6) A. WARNING MESSAGE “BATTERY MANAGEMENT SYSTEM INSPECTION REQUIRED” AND THEN "CHARGING SYSTEM MALFUNCTION/ENGINE COULD STOP UNEXPECTEDLY” IS DISPLAYED IN THE INSTRUMENT CLUSTER INFORMATION DISPLAY AFTER DRIVING IN THE RAIN. B. THE MASTER WARNING LIGHT WILL BE ILLUMINATED. THE MAZDA6 WARNING INDICATOR LIGHT AND WARNING MESSAGES ARE SHOWN BELOW: C. THE FOLLOWING DTCS ARE STORED IN PCM MEMORY: • DTC P1794:00 - CAPACITOR (I-ELOOP) SYSTEM: CAPACITOR (I-ELOOP) MALFUNCTION • DTC P2502:00 - GENERATOR SYSTEM: MALFUNCTION IN VOLTAGE GENERATED BY GENERATOR
00-003-12-27422017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. THIS SERVICE INFORMATION IS BEING ISSUED TO ADVISE DEALERS ABOUT THE FOLLOWING SERVICE CAUTIONS FOR THE 2014 MAZDA6. ENSURE THAT ALL APPROPRIATE DEALER PERSONNEL HAVE BEEN ADVISED OF THIS SERVICE INFORMATION: • AUTOMATIC TRANSAXLE OIL • SPARK PLUG • FRONT BUMPER REMOVAL • ENGINE OIL • TIRE PRESSURE MONITORING SYSTEM (TPMS) • NAVIGATION SYSTEM • MANUAL TRANSAXLE OIL • KICKDOWN SWITCH (ATX) • MAINTENANCE MONITOR
00-001-12-27432017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IN SUPPORT OF THE NEW 2014 MAZDA6 AND THE 2014 CX-5, MAZDA WILL SHIP TO ALL DEALERS ONE (1) NEW SPECIAL SERVICE TOOL (SST). THE SST WILL BE SHIPPED AUTOMATICALLY BY MAZDA’S TOOL VENDOR, SPX DURING JANUARY 2013. THE FOLLOWING SST IS THE LATEST ADDITION TO THE MAZDA REQUIRED TOOL (MRT) LIST.
00-004-12-27412017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER’S MANUAL. SERVICES PERFORMED OUTSIDE OF MAZDA’S FACTORY SCHEDULED MAINTENANCE ARE NOT RECOMMENDED. THESE SERVICES ARE UNNECESSARY AND CREATE UNNEEDED EXPENSES FOR YOUR CUSTOMERS.
00-005-13-28382017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IN SUPPORT OF THE NEW 2014 MAZDA6 AND THE 2014 MAZDA3, MAZDA WILL SHIP TO ALL DEALERS ONE (1) NEW SPECIAL SERVICE TOOL (SST). THE SST WILL BE SHIPPED AUTOMATICALLY BY MAZDA’S TOOL VENDOR BOSCH AUTOMOTIVE SERVICE SOLUTIONS DURING THE MONTH OF OCTOBER 2013.
01-001-13-2746B2017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE MIL ILLUMINATION WITH DTC P2610 (INSTRUMENT CLUSTER INTERNAL ENGINE OFF TIMER PERFORMANCE PROBLEM) STORED IN MEMORY AFTER ENGINE START AND ROOM FUSE 15A (A) REMOVED. NOTE:THE ODOMETER WILL DISPLAY “F0-002” DURING TRANSPORT MODE (ROOM FUSE 15A REMOVED). TRANSPORT MODE IS CANCELED WHEN ROOM FUSE 15A IS INSTALLED OR THE VEHICLE ODOMETER IS MORE THAN 12.4MI (20KM).
02-003-13-2762B2017-04-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. THIS SERVICE BULLETIN ILLUSTRATES THE CONDITIONS WHEN A TPMS WARNING LIGHT MAY ILLUMINATE, WHY IT ILLUMINATED AND HOW TO PROPERLY INITIALIZE THE SYSTEM.THE TIRE PRESSURE MONITORING SYSTEM (TPMS) MONITORS THE TIRE PRESSURE OF ALL FOUR TIRES INDIRECTLY USING THE DATA SENT FROM THE ABS WHEEL SPEED SENSORS. IF THE AIR PRESSURE OF ONE OR MORE TIRES IS TOO LOW COMPARED WITH THE SPECIFIED VALUE (THE INITIAL VALUE LEARNED BY THE SYSTEM), THE SYSTEM WARNS THE DRIVER WITH THE TPMS WARNING LIGHT IN THE INSTRUMENT CLUSTER AND A BEEP SOUND. TO ALLOW THE TPMS TO OPERATE CORRECTLY, IT IS ESSENTIAL THAT THE TPMS BE INITIALIZED TO LEARN NEW CONDITIONS WHENEVER A TIRE RELATED SERVICE IS PERFORMED.
09-018-13-28032017-04-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER NOTICED THIS SYMPTOM. IF THE CONDITION IS SIMILAR TO THE FOLLOWING “CONTROL LOGIC OF AMBIENT TEMPERATURE” OR “DIFFERENCE BETWEEN THE TEMPERATURE DISPLAY AND OTHERS”, ADVISE THE CUSTOMER THAT THIS IS A NORMAL CHARACTERISTIC OF THE VEHICLE AND NOT A MALFUNCTION. IF THE CONDITION DOES NOT MEET THE FOLLOWING AND THE SENSOR MALFUNCTION IS SUSPECTED, MAKE SURE TO INSPECT THE SENSOR ACCORDING TO MS3 ONLINE OR WORKSHOP MANUAL (SECTION 09-22 AMBIENT TEMPERATURE SENSOR INSPECTION).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.