WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

726 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SA-010-232023-03-03. Service bulletin. ENGINE AND ENGINE COOLING; VISIBILITY; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM. Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.
SA-009-232023-03-03. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
07-002-232023-03-03. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced since December 2021 at the supplier.
SA-006/232023-02-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: - Incorrect calendar entry (month/day/year) after a battery disconnect - Infotainment system software update. - BCM TPMS unlearn during vehicle storage or transport. - Wheel/Tire change
SA-005/222023-02-02. Service bulletin. ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
RF-23-022023-02-02. Service bulletin. ELECTRICAL SYSTEM. Due to the supply chain shortages for BDGF-66-5G0G, hardware has been confirmed compatible between BDGF-66-5G0B up to the G suffix. This can be used for repair with vehicles originally equipped with C to G level suffix parts.
09-048-222023-01-05. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may exhibit the following symptoms with DTC P05A0:00 (Active air shutter and the opening angle abnormality (sticking)) stored in memory. Symptom 1 [Mazda3 and CX-30]: The active air shutter is working, but DTC P05A0:00 is stored in memory. Cause 1: This is caused by improper control software of the PCM detecting the DTC immediately without performing the failsafe operation. When the active air shutter detects unusual torque, it is designed to repeat the open/close cycles up to three times as a failsafe to try to remove the object(s) which temporarily disturbed the movement. Symptom 2 [Mazda3, CX-30 and MX-30]: The active air shutter is frozen by snow and/or ice under freezing temperatures with DTC P05A0:00 stored in memory. Cause 2 [Mazda3 and CX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the intake air temperature is above the freezing point, DTC P05A0:00 may be unintentionally detected. [MX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the heater is turned on, DTC P05A0:00 may be unintentionally detected
07-004-22b2023-01-05. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Some customers may complain the A/C blows warm. This may be caused by one of two things. Cause 1: After accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. During a hard acceleration above a certain throttle level opening, the PCM stops the A/C compressor operation for better acceleration. It then resumes the compressor operation after the acceleration. To eliminate this concern, the control software of the PCM has been modified. Cause 2: Insufficient cooling performance at ambient temperature of around 68 °F (20 °C) in daytime. This is caused when both the ambient temperature and the cabin temperature are at around 20 °C (68 °F), auto A/C set at around 20 °C (68 °F) may not cool down the cabin temperature properly. To eliminate this concern, control software of the dash-electrical supply unit (Dash-ESU) has been modified.
SA-019-22c2023-01-05. Service bulletin. ELECTRICAL SYSTEM. MAZDA CONNECTED SERVICES Frequently Asked Questions (FAQ)
SA-017-22d2023-01-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about any of the following: * Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. * Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF * MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. * If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. * If the reception is good to strong, proceed to the Repair Procedure
SA-004-22g2023-01-05. Service bulletin. ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-075-222022-12-02. Service bulletin. ELECTRICAL SYSTEM. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
SA-074-222022-12-02. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; ELECTRICAL SYSTEM. Some customers may complain the HVAC system not maintaining the correct temperature or the ambient (outside) temperature reading incorrectly. This is caused by a failure in the ambient temperature sensor. To correct this issue, the ambient temperature sensor has been modified.
SA-072-222022-12-02. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Customers may complain about the HVAC system is not blowing air and/or excessive noise from HVAC system.
SA-070-222022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored. * U0186:08 Communication error with audio amplifier * U2145:08 Communication error with remote tuner (RT) * U2145:02 Communication error with remote tuner (RT) This may be caused by PIN 6F backing out at the CMU connector 0920-101F.
SA-064-22a2022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.
16-004-22a2022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
16-001-22d2022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12004 or later). Ver. 7000C0A-NA01_12004 fixes these software errors (bugs): * Album artwork may not appear when playing music using an USB connected iPhone. * The center display may turn black when the gear is shifted from reverse position to parking position. * Screen freezes and goes to white screen, then the system reboots. * Steering wheel switches and commander switches cannot control the audio system. * DTC U3000:49 is stored which may be accompanied with following symptoms. - No sound comes out from the speakers. - Audio source selection is unavailable. * When using the navigation with head-up mode, the vehicle icon rotates. * Beep sounds every after couple of minutes. * Language setting may not be accepted correctly. * The audio track may not pause when pressing the mute button. * The system reboots. * The screen may turn black when trying to play a video file in the USB connected device.
09-046-222022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience that, with a specific operation, the touch sensor of front door outer handle does not lock and unlock the doors but the remote transmitter operates correctly. Description of the specific operations: - Specific Operation 1 [MX-30]: After using cabin preconditioning or hazard warning lights for approx.15 minutes. - Specific Operation 2 [MAZDA3 and CX-30]: After using hazard warning lights for approx. 15 minutes. - Specific Operation 3 [MAZDA3, CX-30 and MX-30]: When both touch sensors are touched at once. - Specific Operation 1 and 2 Cause: The touch sensor has been disabled to avoid the unintended locking/unlocking operation caused by rain. - Specific Operation 3 Cause: The control logic is not appropriate. To correct this issue, the control software of the LF control unit (LFU) has been modified.
09-044-222022-12-02. Service bulletin. SEATS; ELECTRICAL SYSTEM. Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. DTCs "B1030:13" and/or "B1032:13" are stored. This is caused by the seat warmer's fail-safe mode which prevents it from working during the initial drive cycle. To correct this issue, the seat warmer has been modified to optimize the temperature control. - B1030:13 Seat warmer unit (LH) circuit malfunction (Heater side) - B1032:13 Seat warmer unit (RH) circuit malfunction (Heater side)
09-019-22a2022-12-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. - Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. - Symptom 2: The touch sensor of the front door outer handle does not unlock the doors. - Cause 1 (for Symptom 1): Water may accumulate around the touch sensor in the outer handle, resulting in temporary lower sensitivity of the capacitive sensor. Also, if car wash foam gets inside the outer handle while washing the vehicle, the foam may disturb the touch sensor detection. Mazda is still working on a mass production change for this concern. - Cause 2 (for Symptom 2): Improper soldering in the production process may disturb the touch sensor detection. To eliminate this concern, the production process has been modified.
07-004-22a2022-11-04. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain the A/C blows warm. This may be caused by one of two things. Cause 1: After accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. During a hard acceleration above a certain throttle level opening, the PCM stops the A/C compressor operation for better acceleration. It then resumes the compressor operation after the acceleration. To eliminate this concern, the control software of the PCM has been modified. Cause 2: Insufficient cooling performance at ambient temperature of around 68 °F (20 °C) in daytime. This is caused when both the ambient temperature and the cabin temperature are at around 20 °C (68 °F), auto A/C set at around 20 °C (68 °F) may not cool down the cabin temperature properly. To eliminate this concern, control software of the dash-electrical supply unit (Dash-ESU) has been modified.
SA-067-222022-11-04. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about the following message displayed in the Multi-Information Display: In the following cases, the MRCC with Stop & Go function system is canceled when the vehicle is traveling at 19 mph (30 km/h) or less: * The Forward Sensing Camera (FSC) cannot detect target objects due to one of the following: - The windshield is dirty - The FSC lens is foggy - There is low visibility due to rain, fog or snow - It is at night and there is not enough light - There is direct or reflected sunlight on the FSC - There is problem with the FSC * There is a problem with the AUTOHOLD control function. * There is a problem with the electric parking brake (EPB).
SA-066-222022-11-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: * C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles] * B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen 7 vehicles built on or before March 2, 2019] * No DTC - Warning Message only [Gen 7 vehicles built after March 2, 2019] DTC C1001:92 or B14F0:92 set as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. * In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). * In other cases this DTC might be found without a related customer concern. NOTE: In most cases, no dealer visit is necessary.
SA-064-222022-11-04. Service bulletin. ELECTRICAL SYSTEM. Some customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.