WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

504 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
05-005-13-2735B2017-04-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0780 (GEAR SHIFTING MALFUNCTION) AND/OR P1738 (AUTO-MATIC TRANSAXLE INTERNAL MALFUNCTION) WITH/WITHOUT U0401, OR OTHER DTCS STORED IN MEMORY.OTHER DTCS (WITH THE ABOVE DTCS) - P0746:00, P0751:00, P0752:00, P0756:00, P0757:00, P0761:00, P0762:00, P0766:00, P0767:00, P0771:00, P0772:00, P079A:00, P0842:00, P0843:00, P0847:00, P0848:00, P0872:00, P0873:00, P0877:00, P0878:00, P1784:00TO CORRECT THE PROBLEM, A NEW PROGRAMMED VALVE BODY HAS BEEN ESTABLISHED.
05-005-13-2735C2017-04-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0780 (GEAR SHIFTING MALFUNCTION) AND/OR P1738 (AUTO-MATIC TRANSAXLE INTERNAL MALFUNCTION) WITH/WITHOUT U0401, OR OTHER DTCS STORED IN MEMORY.OTHER DTCS (WITH THE ABOVE DTCS) - P0746:00, P0751:00, P0752:00, P0756:00, P0757:00, P0761:00, P0762:00, P0766:00, P0767:00, P0771:00, P0772:00, P079A:00, P0842:00, P0843:00, P0847:00, P0848:00, P0872:00, P0873:00, P0877:00, P0878:00, P1784:00TO CORRECT THE PROBLEM, A NEW PROGRAMMED VALVE BODY HAS BEEN ESTABLISHED.
09-034-12-2708A2017-04-26. Service bulletin. INTERIOR LIGHTING. SOME VEHICLES MAY EXHIBIT A NOISE FROM THE MAP LIGHT (A) WHILE DRIVING OR AT IDLE. THIS IS CAUSED BY ONE OF TWO THINGS. 1. EXCESSIVE CLEARANCE BETWEEN THE MAP LIGHT AND LAMP UNIT POSITIONING RIB (FOR MAZDA3 VEHICLES WITH VINS LOWER THAN JM1BL******144839 / PRODUCED BEFORE APRIL 1, 2009). THE DESIGN OF THIS RIB HAS NOW BEEN CHANGED TO CORRECT THIS PROBLEM. 2. THE OVERHEAD CONSOLE BRACKET VIBRATES AND CONTACTS THE ROOF PANEL (FOR MAZDA3 VEHICLES WITH VINS JM1BL******144839 TO JM1BL******707082 / PRODUCED AFTER APRIL 1, 2009 AND BEFORE AUGUST 8, 2012. THE NOISE OCCURS ON VEHICLES THAT HAVE A NON-WOVEN TEXTILE ATTACHED AT THE FRONT STAY. THE MATERIAL OF THE PADS HAS NOW BEEN CHANGED TO CORRECT THIS PROBLEM.
01-028-12-27222017-04-26. Service bulletin. ENGINE. SOME VEHICLES MAY EXPERIENCE A ROUGH IDLE WITH THE MIL ON AND DTC P0015 / P0524 STORED IN MEMORY. • P0015:00 - EXHAUST CMP TIMING OVER-RETARDED • P0524:00 - ENGINE OIL PRESSURE TOO LOW THIS IS CAUSED BY A DROP IN ENGINE OIL PRESSURE DUE TO A PIECE OF FOREIGN OBJECT STUCK ON THE OIL PUMP PRESSURE RELIEF VALVE OR OCV. THE TEMPORARY ENTRY OF THE FOREIGN OBJECT TRIGGERS A MIL ILLUMINATION, BUT ROUGH IDLE WILL NOT BE PRODUCED UNTIL A LATER TIME.
05-006-12-2736A2017-04-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME VEHICLES MAY EXPERIENCE EXCESSIVE SHIFT SHOCK OR A LONG TIME LAG WHEN SHIFTING FROM P TO R OR FROM N TO. THIS IS CAUSED BY MISS LEARNING OF THE TCM FOR SHIFT TIMING. TO CORRECT THE PROBLEM, THE LEARNING LOGIC OF THE TCM HAS BEEN CHANGED.
00-004-12-27412017-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER’S MANUAL. SERVICES PERFORMED OUTSIDE OF MAZDA’S FACTORY SCHEDULED MAINTENANCE ARE NOT RECOMMENDED. THESE SERVICES ARE UNNECESSARY AND CREATE UNNEEDED EXPENSES FOR YOUR CUSTOMERS.
09-046-12-27442017-04-26. Service bulletin. EXTERIOR LIGHTING; EXTERIOR LIGHTING:FOG LIGHTS. SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORMANCE OF THE LIGHT. THIS CONDENSATION/FOG IS A NATURAL HENOMENON THAT OCCURS WHEN THERE IS A FAIRLY LARGE TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND THE OUTSIDE OF THE LIGHT HOUSING. IT IS NORMAL FOR VERY SMALL WATER DROPS TO APPEAR IN CERTAIN LOCATIONS ON THE LIGHT UNITS WHERE THE AIR IS STAGNANT (CONDENSATION), MAKING THE LENS LOOK WHITISH (FOG). THIS HAPPENS MOSTLY IN THE CORNERS AND NARROW SPACES, AND WILL TYPICALLY CLEAR DURING WARMER AMBIENT TEMPERATURES, OR WHEN THE LIGHTS HAVE BEEN ON FOR SOME TIME. EXPLAIN TO THE CUSTOMER THAT THIS IS A NATURAL PHENOMENON AND NOT A QUALITY DEFECT. DO NOT ATTEMPT REPAIRS AS THIS IS CONSIDERED NORMAL, AND IS NOT COVERED UNDER WARRANTY. REPLACING THE LIGHT UNIT WILL NOT CORRECT THIS SYMPTOM.
05-004-12-2706A2017-04-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. SOME VEHICLES MAY EXPERIENCE AN EXCESSIVE SHIFT SHOCK AT ONE OR MORE OF THE FOLLOWING CONDITIONS: • WHEN SHIFTING FROM P TO R POSITION OR N TO R POSITION. • WHEN THE TRANSMISSION SHIFTS IMMEDIATELY AFTER STARTING TO MOVE (IN D POSITION). • WHEN THE TRANSMISSION SHIFTS AT CRUISING SPEED (IN D POSITION). THE INITIAL LEARNING MAY NOT HAVE BEEN COMPLETED AT THE TIME OF VEHICLE PRODUCTION. TO CORRECT THE PROBLEM, ONE OR MORE LEARNING PROCEDURES MAY NEED TO BE PERFORMED.
05-006-12-27362017-04-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME VEHICLES MAY EXPERIENCE EXCESSIVE SHIFT SHOCK OR A LONG TIME LAG WHEN SHIFTING FROM P TO R OR FROM N TO R. THIS IS CAUSED BY MISS LEARNING OF THE TCM FOR SHIFT TIMING. TO CORRECT THE PROBLEM, THE LEARNING LOGIC OF THE TCM HAS BEEN CHANGED.
01-021-12-2695B2017-04-25. Service bulletin. ENGINE. SOME VEHICLES MAY EXHIBIT A SQUEAK NOISE FROM THE ENGINE COMPARTMENT WHEN THE VEHICLE STARTS MOVING AND/OR AT THE TIME OF TRANSMISSION SHIFTING. THIS IS CAUSED BY STICK-SLIP NOISE OCCURING AT THE CONTACT SURFACES BETWEEN THE NO. 4 ENGINE MOUNT RUBBER AND THE NO. 4 ENGINE MOUNT BRACKET WHEN THE ENGINE SHAKES BACK AND FORTH. TO CORRECT THE PROBLEM, THE NO. 4 ENGINE MOUNT IS REPLACED AND GREASE IS APPLIED ON THE CONTACT SURFACES OF THE NO. 4 ENGINE MOUNT BRACKET.
09-045-12-27282017-04-25. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. SOME VEHICLES MAY EXPERIENCE THAT PANDORA GETS DISCONNECTED WITH A MESSAGE AS SHOWN. THIS HAPPENS WHEN PANDORA IS PLAYING VIA BLUETOOTH AND AN IPHONE/IPOD, ETC. IS CONNECTED OR DISCONNECTED FROM THE USB TERMINAL. TO GET PANDORA TO PLAY AGAIN, THE PANDORA APPLICATION NEEDS TO BE RESTARTED. THIS IS CAUSED BY IMPROPER SOFTWARE OF THE BLUETOOTH UNIT. TO CORRECT THE PROBLEM, THE SOFTWARE OF THE BLUETOOTH UNIT HAS BEEN CHANGED.
01-005-13-2738A2017-04-24. Service bulletin. ENGINE. SOME VEHICLES MAY EXPERIENCE DIFFICULTY WITH ENGINE STARTING IN THE WINTER (CRANKS BUT NO START), BUT CAN BE STARTED USING THE DE-CHOKE MODE WITH NO DTC RECORDED. THIS IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED.DE-CHOKE MODE1.FULLY DEPRESS THE ACCELERATOR PEDAL AND CRANK THE ENGINE FOR 4 TO 5 SECONDS.2.TURN THE IGNITION SWITCH TO THE LOCK POSITION AND RELEASE THE ACCELERATOR PEDAL.3.START THE ENGINE WITHOUT DEPRESSING THE ACCELERATOR PEDAL.
07-002-13-28422017-04-24. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS CAUSED BY CONDENSATION, DUST, AND POLLEN WITHIN THE COOLING UNIT. THIS CONDITION IS USUALLY WORSE DURING HIGH HUMIDITY CONDITIONS. “MAZDA AIR COOLING COIL COATING” IS AVAILABLE TO ENCAPSULATE THE MOLD TO REDUCE ODORS. IF THE PRODUCT IS PROPERLY APPLIED, IT CAN EFFECTIVELY REDUCE THE MUSTY/MILDEW ODOR FOR UP TO THREE YEARS.NOTE:SEE PARTS INFORMATION FOR MAZDA AIR COOLING COIL COATING AND KIT PART NUMBERS.
09-028-12-2701B2017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
09-041-12-27272017-04-24. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). THE NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE.
02-008-13-28112017-04-24. Service bulletin. EQUIPMENT. SOME VEHICLES MAY EXHIBIT A SQUEAKING OR KNOCKING NOISE FROM THE REAR OF THE VEHICLE WHEN PASSING OVER A BUMP. THIS IS CAUSED BY DUST ENTERING BETWEEN THE REAR STABILIZER BUSHING AND STABILIZER BAR, WHICH WEARS DOWN THE BUSHING. TO CORRECT THE PROBLEM, THE REAR STABILIZER BAR IS REPLACED WITH A MODIFIED ONE (WITH A SET OF STABI-LIZER BUSHINGS AND BRACKETS).
01-021-13-2817B2017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED.
05-005-13-27352017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0780 (GEAR SHIFTING MALFUNCTION) AND/OR P1738 (AUTO-MATIC TRANSAXLE INTERNAL MALFUNCTION) WITH/WITHOUT U0401, OR OTHER DTCS STORED IN MEMORY.OTHER DTCS (WITH THE ABOVE DTCS) - P0746:00, P0751:00, P0752:00, P0756:00, P0757:00, P0761:00, P0762:00, P0766:00, P0767:00, P0771:00, P0772:00, P079A:00, P0842:00, P0843:00, P0847:00, P0848:00, P0872:00, P0873:00, P0877:00, P0878:00, P1784:00TO CORRECT THE PROBLEM, A NEW PROGRAMMED VALVE BODY HAS BEEN ESTABLISHED.
05-005-13-2735A2017-04-24. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0780 (GEAR SHIFTING MALFUNCTION) AND/OR P1738 (AUTO-MATIC TRANSAXLE INTERNAL MALFUNCTION) WITH/WITHOUT U0401, OR OTHER DTCS STORED IN MEMORY.OTHER DTCS (WITH THE ABOVE DTCS) - P0746:00, P0751:00, P0752:00, P0756:00, P0757:00, P0761:00, P0762:00, P0766:00, P0767:00, P0771:00, P0772:00, P079A:00, P0842:00, P0843:00, P0847:00, P0848:00, P0872:00, P0873:00, P0877:00, P0878:00, P1784:00TO CORRECT THE PROBLEM, A NEW PROGRAMMED VALVE BODY HAS BEEN ESTABLISHED.
02-004-13-2770B2017-04-21. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
01-019-13-28152017-04-14. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. SOME VEHICLES MAY EXHIBIT THE HEADLIGHTS FLICKERING WHEN THE VEHICLE IS DECELERATING (BY APPLYING THE BRAKES) WITH THE HEADLIGHTS ON. THIS CONCERN IS CAUSED BY INADEQUATE ALTERNATOR OUTPUT (CONTROLLED BY THE PCM) WHEN THE BATTERY IS UNDER A HEAVY LOAD. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED.
01-020-13-28162017-04-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME VEHICLES MAY EXHIBIT THE ENGINE RPM TEMPORARILY GOING UP ABOVE 3,000 WHEN THE ACCELERATOR PEDAL IS SLIGHTLY PUSHED WHILE SHIFTING AROUND 30 KM/H (19 MPH). THE ENGINE RPM RETURNS TO IDLE IF THE DRIVER TAKES THEIR FOOT OFF THE ACCELERATOR PEDAL. THIS CONCERN IS CAUSED BY IMPROPER CALIBRATION OF THE PCM FOR TORQUE TRIM CONTROL. TORQUE TRIM CONTROL IS USED ON THIS M/T TO ADJUST THE ENGINE RPM TO A SUITABLE SPEED FOR THE GEAR AFTER SHIFTING. THE FUNCTION ONLY WORKS WHEN THE DRIVER STEPS ON THE ACCELERATOR PEDAL WHILE SHIFTING TO HELP ACHIEVE SMOOTH SHIFTS. TO CORRECT THE PROBLEM, THE PCM SOFTWARE HAS BEEN MODIFIED.
01-021-13-28172017-04-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED.
01-021-13-2817A2017-04-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0128:00 (THERMOSTAT STUCK OPEN). THIS CONCERN IS CAUSED BY IMPROPER CONTROL LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEEN CHANGED.
09-018-13-28032017-04-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER NOTICED THIS SYMPTOM. IF THE CONDITION IS SIMILAR TO THE FOLLOWING “CONTROL LOGIC OF AMBIENT TEMPERATURE” OR “DIFFERENCE BETWEEN THE TEMPERATURE DISPLAY AND OTHERS”, ADVISE THE CUSTOMER THAT THIS IS A NORMAL CHARACTERISTIC OF THE VEHICLE AND NOT A MALFUNCTION. IF THE CONDITION DOES NOT MEET THE FOLLOWING AND THE SENSOR MALFUNCTION IS SUSPECTED, MAKE SURE TO INSPECT THE SENSOR ACCORDING TO MS3 ONLINE OR WORKSHOP MANUAL (SECTION 09-22 AMBIENT TEMPERATURE SENSOR INSPECTION).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.