Recalls that may apply to the 2004 Mack MR
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 12V017000 | 2012-01-20. SUSPENSION:FRONT. MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002-2005 MR AND LE HEAVY TRUCKS, MANUFACTURED FROM FEBRUARY 1, 2002, THROUGH DECEMBER 22, 2004. OVER TIME, THE VEHICLE’S LOAD MAY RESULT IN FATIGUE CRACKS OF THE FRONT AXLE BEAM. THESE CRACKS CAN PROPAGATE AND RESULT IN COMPLETE FRACTURE OF THE AXLE BEAM. Built 2002-02-01 to 2004-12-22. |
|---|---|
| 10V069000 | 2010-03-03. POWER TRAIN:AXLE ASSEMBLY. MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS. Built 2002-02-01 to 2003-09-30. |
| 09V240000 | 2009-06-30. POWER TRAIN:AXLE ASSEMBLY. MACK IS RECALLING 10,300 MODEL YEAR 2004 AND 2005 CL, CV, DM, LE, AND RB AND MODEL YEAR 2004 RD HEAVY TRUCKS MANUFACTURED FROM OCTOBER 1, 2003 THROUGH SEPTEMBER 30, 2004, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE. THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS. Built 2003-10-01 to 2004-09-30. |
| 05V524000 | 2005-11-17. FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY. ON CERTAIN DIESEL POWERED HEAVY DUTY TRUCKS, THE BOLTS ATTACHING THE FUEL TANK MOUNTING BRACKETS TO THE FRAME MAY HAVE INSUFFICIENT TORQUE AND THEREFORE MAY RESULT IN PREMATURE FAILURE OF THE FUEL TANK MOUNTING. Built 2003-09-01 to 2005-09-30. |
| 05V312000 | 2005-07-07. SUSPENSION. ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE. Built 2004-01-01 to 2005-03-31. |
| 04V159000 | 2004-04-07. FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES. ON CERTAIN CHASSIS BUILT WITH LNG ENGINES, THE NEXGEN LNG TANK'S PRIMARY AND SECONDARY RELIEF VALVES COULD FAIL TO OPEN AND RELIEVE TANK PRESSURE. Built 1995-04-26 to 2004-02-09. |
| 2012016 | 2012-01-19. Suspension. On certain trucks, the front axle beam may have been manufactured incorrectly. In certain application the load on the axle could allow stress cracks to form which, over time, may cause the axle beam to fail. This could result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if required, replace the axle beam. Note: This campaign also covers MR and LE vehicles previously repaired under recall 2009199 (Mack SC0341). |
|---|---|
| 2009199 | 2009-07-07. Suspension. On certain vehicles, the front axle beam may not have been manufactured correctly. Transverse shear lines on the bottom of the axle could allow cracks to form which, over time, may cause the axle beam to fail. This could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if required, replace the axle beam. |
| 2005363 | 2005-11-16. Fuel System. On certain vehicles, the bolts attaching the fuel tank mounting brackets to the frame may have insufficient torque and therefore may result in premature failure of the fuel tank mounting. Fuel tank mounting bolt failure could allow the tank to separate from the vehicle and leak which, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel tank mounting bolts. |
| 2005200 | 2005-07-07. Suspension. On certain vehicles, the rear suspension transverse beam castings were not made to specifications. If a casting were to break when the vehicle is in motion, parts could become projectiles with potential to cause property damage, personal injury or death. Also, the transverse beam may drop down low enough to contact the road surface causing sparks that could ignite a fire. Correction: Dealers will inspect and, if necessary, replace the transverse beams. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.