Service bulletins for the 2022 Lincoln Aviator
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
201 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Heating and air conditioning are shown. Show all
| SSM 52373 | 2024-04-04. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Some 2020-2024 Aviator vehicles equipped with auto air refresh option (minor feature code G1DAG) may exhibit a buzzing/clicking/humming/ticking sound from the OHC and/or diagnostic trouble code (DTC) P24AE in the heating ventilation and air conditioning (HVAC) module. To confirm if a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). If diagnostics lead to the in-vehicle temperature and humidity sensor as the causal part, a new lower level part is available. It is not necessary to replace the OHC assembly if only the sensor is suspect. Use part number L1MZ-19F666-A to resolve the concern. |
|---|---|
| SSM 50811 | 2022-06-01. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Some 2020-2022 Explorer/Aviator vehicles may exhibit the A/C blowing warm air with DTCs P0645, P2CFC, and/or P2CFD present in the heating ventilation and air conditioning (HVAC) module. This may be due to spread terminal/terminal pushout in wire harness 14290 and on the corresponding pins to the body control module C (BCMC). Before replacement of the BCMC, disconnect all connectors from the BCMC and check the BCMC pins and wire terminals for damage. Refer to Workshop Manual (WSM), Section 419-10. If spread terminals or terminal pushout is present, repair as necessary. Refer to Wiring Diagram, Cell 005 for repair procedures. Reconnect all connections to the BCMC as indicated by the procedure in the WSM. Test the function of the A/C to verify that it is blowing cold air. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.