WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Land Rover Range Rover Sport

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

736 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
SSM718642023-07-17. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. When returning failed parts through warranty it has been found that the rubber surround is still attached to the camera lens. This applies to both high line and low line rear camera.
LTB00814NAS42021-03-22. Service bulletin. SERVICE BRAKES; SUSPENSION; BACK OVER PREVENTION. The underhood lower Noise Vibration Harshness (NVH) pads and dirty air duct guides may show signs of ripping, tearing, and/or has a poor finish.
SSM720502021-03-15. Service bulletin. BACK OVER PREVENTION. Issue: Following replacement of front Air Struts Dealers / Customer may report a noise or a vehicle lean error state. On investigation the front Air Spring is found to be misaligned and damaged.
SSM734212017-12-14. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 "Rear Camera - No Signal" and or U1A4B-49 "Control Module Processor B - Internal Failure" stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
SSM734212017-09-08. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 ?Rear Camera - No Signal? and or U1A4B-49 ?Control Module Processor B ? Internal Failure? stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
N024NAS12017-08-25. Service bulletin. SUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). Situation: An issue has been identified on certain vehicles within the listed Affected Vehicle Range which may have been manufactured away from process and, in some cases, a general warning/information message (red or amber) for the air suspension system. This could occur in normal driving when the air suspension system attempts to vent air or when the vehicle attempts to lower itself, either by the driver demand or automatic access.
SSM729782017-04-12. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT; EQUIPMENT:ELECTRICAL; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). ISSUE: A CUSTOMER MAY REPORT AN INTERMITTENT MESSAGE ‘HILL DESCENT CONTROL (HDC) AND STABILITY ASSIST ARE UNAVAILABLE’ DISPLAYED ON THE INSTRUMENT CLUSTER. AFFECTS RANGE ROVER AND RANGE ROVER SPORT 16MYONWARDS. THE MESSAGE CAN APPEAR WHERE THE CUSTOMER SWITCHES THE IGNITION ON ONLY BUT DOESN’T START THE ENGINE UNTIL AFTER A PERIOD OF 32 SECONDS. THE FOLLOWING DTC WILL HAVE BEEN LOGGED: - U0140-87: ANTI-LOCK BRAKE SYSTEM CONTROL MODULE (ABS) LOST COMMUNICATION WITH BODY CONTROL MODULE – MISSING MESSAGE. THE MESSAGE WILL CLEAR AT THE NEXT IGNITION CYCLE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.