Service bulletins for the 2015 Land Rover Range Rover Sport
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
710 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Transmission and driveline are shown. Show all
| LTB00898NAS2 | 2018-11-05. Service bulletin. POWER TRAIN; EQUIPMENT. The Transmission Control Switch (TCS) Park (P) button coating may fade or delaminate. |
|---|---|
| LTB00898NAS2 | 2018-10-22. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. The Transmission Control Switch (TCS) Park (P) button coating may fade or delaminate. |
| SSM73875 | 2018-07-16. Service bulletin. POWER TRAIN. Issue: A customer may report that the gear selector will not select a gear or move out of park when the release button is pressed and the selector operated with one or more of the following symptoms noted on a Range Rover Sport 2014-2016 MY only: Release button appears loose or no resistance when pressed, Release button appears to be binding or will not move when pressed. |
| LTB01156NAS1 | 2018-05-29. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. The engine Malfunction Indicator Lamp (MIL) may be illuminated on the Instrument Cluster (IC) with Diagnostic Trouble Code (DTC) P132B-77 stored in the Powertrain Control Module (PCM). |
| SGI18-05 | 2018-05-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the 'Service Required' message will not appear on the Instrument Cluster (IC) if a vehicle has reached its service point and the engine is started normally by pressing the engine START/STOP button with the brake pedal pressed. Turning on the ignition only, by pressing the engine START/STOP button without the brake pedal pressed, will still allow the 'Service Required' warning message to be displayed. In addition, the latest Powertrain Control Module (PCM) software has introduced a concern relating to the ability to reset the service message indicator. The latest IC software will rectify these concerns. |
| SSM73409 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Issue: Powertrain Transmission Module Learn Adaption routine has been instated on SDD/Pathfinder. |
| LTB-00871-NAS-1 | 2018-04-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Situation: After a Service Interval Reset, the Service Interval Indicator (SII) may appear on the Instrument Cluster (IC) for less than one second when no service is required. Cause: This may be caused by a discrepancy between the values in the Powertrain Control Module (PCM) and the IC for next service initialization. |
| N118NAS1 | 2018-04-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the 'Service Required' message will not appear on the Instrument Cluster (IC) if a vehicle has reached its service point and the engine is started normally by pressing the engine START/STOP button with the brake pedal pressed. Turning on the ignition only, by pressing the engine START/STOP button without the brake pedal pressed, will still allow the 'Service Required' warning message to be displayed. In addition, the latest Powertrain Control Module (PCM) software has introduced a concern relating to the ability to reset the service message indicator. The latest IC software will rectify these concerns. |
| LTB01109NAS1 | 2018-01-29. Service bulletin. POWER TRAIN. The Terrain Response® system may not operate as expected when in 'Auto' mode by not automatically selecting the correct driving mode. As the driving mode changes, the transmission may downshift, the engine Revolutions Per Minute (RPM) may also increase, and/or the 'Auto Stop/Start OFF' warning indicator may illuminate on the Instrument Cluster (IC). |
| LTB00584NAS5 | 2017-12-14. Service bulletin. POWER TRAIN; STEERING. Situation: The steering wheel switches (volume, seek, OK/menu, mode, phone, voice) and transmission paddle shifters may exhibit intermittent operation, causing one or more of the following issues: ? Audio volume does not adjust (up and/or down)? Radio 'seek' buttons do not operate ? Volume control buttons cause the radio station to change ? InControl system slow to operate (blank screen followed by the 'Land Rover' logo) ? Transmission paddle shifters do not operate ? Diagnostic Trouble Codes (DTC) U2013-02 and/or B1D21-13 stored |
| SSM72080 | 2017-06-14. Service bulletin. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT. "ISSUE: DIFFERENTIAL PINION OIL SEAL LEAK. CAUSE: PINION SEAL PREVIOUSLY NOT AVAILABLE AS A SERVICEABLE COMPONENT LEADING TO DIFFERENTIAL REPLACEMENTS." |
| SSM72901 | 2017-06-14. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE); POWER TRAIN:AUTOMATIC TRANSMISSION. ISSUE: OIL LEAKING BETWEEN THE AUTOMATIC TRANSMISSION AND TRANSFER CASE WHICH IS CURRENTLY BEING MISDIAGNOSED LEADING TO REPEAT REPAIRS, I.E. LEAKS INCORRECTLY BEING IDENTIFIED AS COMING FROM THE REAR TRANSMISSION OIL SEAL OR SUMP. |
| LTB00871NAS4 | 2017-06-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SITUATION: AFTER A SERVICE INTERVAL RESET, THE SERVICE INTERVAL INDICATOR (SII) MAY APPEAR ON THE INSTRUMENT CLUSTER (IC) FOR LESS THAN ONE SECOND WHEN NO SERVICE IS REQUIRED. |
| SSM72803 | 2017-06-13. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). ISSUE: CUSTOMERS MAY REPORT THAT THE SURFACE OF THE ‘P’ BUTTON ON THE L494 RANGE ROVER SPORT - GSM IS WEARING WITH LOSS OF DEFINITION OF THE PAINT FINISH (SEE ATTACHED FILE FOR AN EXAMPLE) |
| LTB00757NAS5 | 2017-06-13. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP OR IMMEDIATELY AFTER AN AUTOMATIC ENGINE RESTART (WHEN INTELLIGENT STOP/START IS ACTIVE). • THE INSTRUMENT CLUSTER HAS SWITCHED OFF AFTER AN AUTOMATIC ENGINE STOP AND DRIVER EXIT CONDITIONS DO NOT EXIST AND THE VEHICLE DOES NOT AUTOMATICALLY RESTART THE ENGINE UPON RELEASE OF THE BRAKE PEDAL (NOTE. DTC P162F-00 MAY BE STORED IN THE ENGINE CONTROL MODULE [ECM]). |
| LTB00906NAS3 | 2017-06-13. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). SITUATION: ON VEHICLES FITTED WITH THE TWIN SPEED TRANSFER CASE, A JUDDER MAY BE FELT FROM UNDERNEATH THE VEHICLE WHEN STEERING AT LOW VEHICLE SPEEDS, SUCH AS TURNING LEFT OR RIGHT AT AN INTERSECTION. |
| SSM72080 | 2017-06-13. Service bulletin. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT. DIFFERENTIAL PINION OIL SEAL LEAKS |
| SSM72568 | 2017-06-13. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). MIL WITH DIESEL EXHAUST FLUID (DEF) WARNING DISPLAYED |
| LTB00883NAS2 | 2017-06-12. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE (DTC) P068A-00 STORED IN THE POWERTRAIN CONTROL MODULE (PCM) CAUSE: THIS MAY BE CAUSED BY A PCM SOFTWARE ISSUE (CPU RESPONSE TIME ERROR DURING VEHICLE SHUTDOWN PROCEDURE)." |
| SSM52757 | 2017-06-12. Service bulletin. EQUIPMENT:ELECTRICAL; POWER TRAIN:AUTOMATIC TRANSMISSION; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. "ISSUE: EXCESSIVE BRAKE PEDAL PRESSURE REQUIRED TO GET THE AUTO TRANSMISSION OUT OF PARK, WARNING LIGHTS ON THE INSTRUMENT PACK WITH ASSOCIATED DTC'S FOR BRAKE LIGHT SWITCH (P0504-27, P0504-62, C1A96-64) OR BRAKES SHOWING SIGNS OF DRAG AND BINDING. CAUSE: INCORRECT BRAKE LIGHT SWITCH SETTING. NOTE: ANALYSIS OF RETURNED BRAKE SWITCHES HAVE SHOWN NO ISSUES WITH THE BRAKE SWITCH ITSELF. DO NOT REPLACE THE SWITCH BEFORE ADJUSTMENT IS CARRIED OUT." |
| LTB00871NAS2 | 2017-06-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: AFTER A SERVICE INTERVAL RESET, THE SERVICE INTERVAL INDICATOR (SII) MAY APPEAR ON THE INSTRUMENT CLUSTER (IC) FOR LESS THAN ONE SECOND WHEN NO SERVICE IS REQUIRED. CAUSE: THIS MAY BE CAUSED BY A DISCREPANCY BETWEEN THE VALUES IN THE POWERTRAIN CONTROL MODULE (PCM) AND THE IC FOR NEXT SERVICE INITIALIZATION." |
| SGI15-40 | 2017-06-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "DESCRIPTION TO ADDRESS CONCERNS WITH THE CORRECT OPERATION OF THE OXYGEN (O2) SENSORS, UPDATED POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS REQUIRED ON THE MODELS, MODEL YEARS, ENGINE VARIANTS, AND VEHICLE IDENTIFICATION NUMBER (VIN) RANGES AS LISTED IN THE AFFECTED VEHICLE RANGE." |
| LTB00757NAS4 | 2017-06-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP OR IMMEDIATELY AFTER AN AUTOMATIC ENGINE RESTART (WHEN INTELLIGENT STOP/START IS ACTIVE)." |
| LTB00821NAS1 | 2017-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:MANUAL TRANSMISSION. "SITUATION: WHEN IN SPORT (S) MODE, THE TRANSMISSION MAY CHANGE GEARS ONLY MANUALLY (VIA STEERING WHEEL MOUNTED SHIFT PADDLES OR THE GEAR SELECTOR [RANGE ROVER SPORT ONLY]) AND DOES NOT REVERT BACK TO AUTO MODE. CAUSE: THIS MAY BE CAUSED BY AN INCORRECT CALIBRATION CAUSING THE VEHICLE TO ENTER MANUAL ONLY MODE WHEN THE 'PROGRESS CONTROL SYSTEM' SELECTS A MODE OF OPERATION." |
| SGI15-40 (ISSUE | 2017-06-09. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. DESCRIPTION: TO ADDRESS CONCERNS WITH THE CORRECT OPERATION OF THE OXYGEN (O2) SENSORS, UPDATED POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS REQUIRED ON THE MODELS, MODEL YEARS, ENGINE VARIANTS, AND VEHICLE IDENTIFICATION NUMBER (VIN) RANGES AS LISTED IN THE AFFECTED VEHICLE RANGE. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.