WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Kia Stinger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

45 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
TSB_ELE4172026-05-01. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: INFOTAINMENT SOFTWARE UPDATE PROCEDURE - This bulletin provides information on the process for downloading infotainment software updates and preparing USB for installation on applicable Kia vehicles. The software downloads and USB preparation process is similar across all supported platforms; however, in‑vehicle installation procedures vary by head unit type.
SC279_OWNR2024-01-06. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia is conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.
SC279_TSB2024-01-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: THETA 2.0L T-GDI ECM SOFTWARE LOGIC IMPROVEMENT (SC279) - This bulletin provides information to upgrade the software logic of the engine control module (ECM) with an improved version on 2018-2021MY Stinger (CK) vehicles equipped with a Theta 2.0L T-GDI ULEV engine manufactured from September 29, 2017 through January 20, 2021. The subject vehicles may have engine calibrations that were not optimized for emissions standards under certain specific conditions, which may cause the vehicle to release air pollutants which exceed Federal and California standards (such as NMOG (Non-Methane Organic Gas) and CO (Carbon Monoxide) during IUVP (In-Use Verification Program). To ensure compliance with emissions regulations, apply the improved logic to the ‘ENGINE’ system using the KDS ECU Upgrade function as described in this bulletin.
SC279_QA2024-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: QUESTION AND ANSWER - This document is the Question and Answer Guide containing the most frequently asked questions regarding the Voluntary Emissions Service Campaign (SC279).
SC279_POC2024-01-06. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:CANISTER; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. SC279_POC: PROOF OF CORRECTION CARD
SC279_STKR2024-01-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. SC279_STKR: VOLUNTARY EMISSIONS SERVICE CAMPAIGN COMPLETION STICKER
SC279_DPSM2024-01-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: DEALER PARTS AND SERVICE MANAGER MEMO - This document is the announcement to the dealer Parts and Service Managers that Kia is conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.
SC279_DP2024-01-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: DEALER PRINCIPAL MEMO - This document is the announcement to the dealer principals that Kia is conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.
PS7382022-12-06. Service bulletin. STEERING; ELECTRICAL SYSTEM. PITSTOP: VARIANT CODING AFTER MDPS/EPS REPLACEMENT - This Pitstop provides information to perform variant coding on some 2018-2023MY Stinger (CK) vehicles, after replacement of an MDPS and/or EPS unit. The selections on KGIS do not match those on the KDS. Follow the procedure below to perform variant coding on a newly replaced MDPS and/or EPS unit.
TSB_ELE2642022-11-02. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: AVN HEAD UNIT REPLACEMENT FOR INTERMITTENT NO SOUND - This bulletin provides information to replace the AVN head unit on some 2018-2020MY Stinger (CK) vehicles produced from October 1, 2017 through May 31, 2019, which exhibit intermittent audio dropping or audio sound cutting out concern while the engine is 'ON' or during normal driving operation. Confirm that the concern is present and place an order for the applicable AVN part required.
TSB_ENG219_R12022-09-30. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: MAINTENANCE REMINDER FEATURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.
TSB_ELE209_R32022-08-18. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."
TSB_ELE2552022-07-02. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; STRUCTURE:BODY:BUMPERS; EQUIPMENT ADAPTIVE/MOBILITY. TECHNICAL SERVICE BULLETIN: DYNAMIC BENDING LIGHT DTC B232509/B232609 - MOISTURE ABSORBENT & BRACKET REPLACEMENT - This bulletin provides information to repair an inoperative Dynamic Bending Light (DBL) by replacing the moisture absorbent and bracket on some 2018-2022MY Stinger (CK) vehicles produced from October 11, 2017 through April 27, 2022, which may exhibit a MIL 'ON' with DTC B232509 or B232609 (active or pending). This may be due to an expanded moisture absorbent causing the bracket to interfere with the DBL module. New parts are available to address this condition (see chart below for details).
TSB_ELE239_R12021-12-01. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: ECM OBD CODE DISPLAY LOGIC IMPROVEMENT (SA474) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to update the software logic of the Engine Control Module (ECM) system on some 2019MY Stinger (CK) vehicles equipped with the 2.0L T-GDI engine and 8AT transmission, 2020MY Soul (SK3) vehicles with 2.0L MPI engine and 6MT transmission, and 2020MY Sportage (QL) vehicles with 2.4L GDI engine and 6AT transmission, in order to improve OBD authentication code display logic.
PS7042021-08-25. Service bulletin. FORWARD COLLISION AVOIDANCE; ELECTRICAL SYSTEM. PITSTOP: FRONT RADAR SENSOR MOUNTING INSPECTION (PS704) - This pitstop provides information regarding front radar sensor alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.
TSB_ELE2392021-06-25. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: ECM OBD CODE DISPLAY LOGIC IMPROVEMENT (SA474) - This bulletin provides the procedure to update the software logic of the Engine Control Module (ECM) system on some 2019MY Stinger (CK) vehicles equipped with the 2.0L T-GDI engine and 8AT transmission, 2020MY Soul (SK3) vehicles with 2.0L MPI engine and 6MT transmission, and 2020MY Sportage (QL) vehicles with 2.4L GDI engine and 6AT transmission, in order to improve OBD authentication code display logic.
TSB_ELE209_R22021-04-15. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
TSB_ELE209_R12021-03-24. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
PS6632020-11-13. Service bulletin. ELECTRICAL SYSTEM. PITSTOP: MFC, CONCERNS FOR DISABLED OPERATION - This Pitstop provides information regarding concerns with disabled operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.
TSB_ELE2092020-10-05. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
PS6522020-04-07. Service bulletin. ELECTRICAL SYSTEM. PITSTOP: INTERMITTENT NO SOUND - This Pitstop provides information regarding audio dropping / intermittent no sound concerns on some 2018-2019MY Stinger (CK) vehicles equipped with the Harman/Kardon Audio system. This is an intermittent issue affecting all audio sources (AM, FM, SXM, BT Audio, etc.) that is temporarily resolved by key cycling the vehicle or by disabling QuantumLogic surround.
PS5892019-04-30. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. PITSTOP: KDS COOLING FAN ACTUATION TEST - This Pitstop provides information regarding the KDS Cooling Fan Actuation Test which is only available for 2019MY~ Stinger (CK) vehicles. A screenshot of the Cooling Fan Actuation Test for a 2018MY Stinger (CK) is shown below for reference with a result of "Operation Command Failed(0x22)" (or a possible result of "Operation Command Sent") when the actuation was attempted. This is a normal operation of KDS as this actuation test is not supported for 2018MY Stinger (CK) and therefore does not require any further diagnosis or repair of the KDS or cooling fan circuit.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.