Service bulletins for the 2007 Kia Sedona
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
38 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Equipment and accessories are shown. Show all
| PS443 | 2020-12-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT. TSB - USE OF AFTERMARKET USB CHARGING CABLES IN USB/12V PORTS - This article provides information regarding the use of USB ports and 12V power outlets to connect/charge mobile phones. Customers may experience issues with their head units that may be related to the use of aftermarket USB charging cables, including; * Electrical interference and limited or no functionality when attempting to play music, or when charging a device through the USB port * Excessive static or noise when listening to the audio source * Malfunctions and screen freeze of the head unit screen * Slow down of the system response while device is plugged in * Music will not play from iPhone 5 or 6 with Kia iPod cable and aftermarket adapter * No or limited functionality when trying to play music from an Apple device |
|---|---|
| TSB-GEN085R1 | 2017-08-02. Service bulletin. EQUIPMENT:MECHANICAL; EQUIPMENT ADAPTIVE/MOBILITY. TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? It is critical for technicians to be aware that ALL such locking fasteners, regardless of type, are for ?one time use? only. |
| TSB-GEN085 | 2017-08-02. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT ADAPTIVE/MOBILITY. TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? |
| PS306 | 2017-08-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; SEATS:MID/REAR ASSEMBLY. PITSTOP: SECOND ROW SEAT RELEASE MECHANISM INOPERATIVE - When diagnosing a concern relating to a difficult to release or inoperative second row seat tumble feature, review this Article for instructions. |
| PS266R1 | 2017-02-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED. |
| TSBBOD095 | 2017-02-07. Service bulletin. EQUIPMENT; VISIBILITY/WIPER. TSB: WINDSHIELD WASHER PUMP INLET FILTER REPLACEMENT - THIS BULLETIN PROVIDES INFORMATION RELATING TO POSSIBLE FOREIGN DEBRIS ACCUMULATION ON THE WINDSHIELD WASHER PUMP INLET FILTER. OVER TIME, SOME KIA VEHICLES MAY EXHIBIT A LIMITED APPLICATION OF WINDSHIELD WASHER FLUID WHEN THE WASHER FUNCTION IS USED. LIMITED APPLICATION OF WINDSHIELD WASHER FLUID CAN BE CAUSED BY FOREIGN DEBRIS ON THE WASHER PUMP INLET FILTER. TO CORRECT THIS CONDITION, REPLACE THE WASHER PUMP INLET FILTER AND PERFORM THE WINDSHIELD WASHER RESERVOIR FLUSHING PROCEDURE OUTLINED IN THIS TSB. |
| VOLUME 17 ISS 4 | 2016-06-17. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 107 | 2016-03-16. Service bulletin. STRUCTURE:BODY:DOOR; EQUIPMENT; VISIBILITY. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| SC-101 | 2014-05-14. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. KIA: PROCEDURE INFORMATION REGARDING THE FRONT HEATER PIPE ASSEMBLY NEEDING REPLACING DUE POSSIBLE CORROSION FORMING ON HEATER PIPE, PREVENTING HEATER PIPE TO FAIL AND NOT OPERATE CORRECTLY. MODEL 2006-2010 SEDONA. *PE |
| TSB-022 | 2009-09-18. Service bulletin. EQUIPMENT:OTHER:LABELS. KIA: LOAD CARRYING CAPACITY LABEL REQUIREMENTS AND INSTRUCTIONS TO COMPLY WITH FMVSS 110. PROVIDING INFORMATION FOR THE NEW REQUIREMENTS RELATED TO LOAD CARRYING CAPACITY (LCC) WHEN CERTAIN ACCESSORIES ARE ADDED TO A COMPLETED VEHICLE PRI0R TO FIRST RETAIL SALE. *PE |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.