Recalls that may apply to the 2006 Kia Sedona
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 20V088000 | 2020-02-14. ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE. Kia Motors America (Kia) is recalling certain 2006-2010 Sedona and 2007-2009 Sorento vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short. Built 2005-06-15 to 2009-07-15. |
|---|---|
| 16V389000 | 2016-06-01. LATCHES/LOCKS/LINKAGES:HOOD:LATCH. Kia Motors Corporation (Kia) is recalling certain model year 2006-2014 Kia Sedona vehicles manufactured from June 15, 2005, through April 04, 2014. In the affected vehicles, the secondary hood latch may bind and remain in the unlatched position when the hood is closed. Built 2005-06-15 to 2014-04-04. |
| 16V387000 | 2016-06-01. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 and originally sold in, or currently registered in Alaska, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion from salt water exposure such as from road salt use. Built 2005-06-15 to 2012-08-14. |
| 13V550000 | 2013-11-05. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 originally sold in, or currently registered in Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia or the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion resulting from prolonged exposure to salty environments. Built 2005-06-15 to 2012-08-14. |
| 09V130000 | 2009-04-17. EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. HUYNDAI-KIA IS RECALLING 139,844 MY 2006-2007- SEDONA, SPORTAGE, SORENTO AND MY RONDO AND AMANTI VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED. Built 2005-10-06 to 2006-04-30. |
| 06V349000 | 2006-09-11. ELECTRICAL SYSTEM:WIRING. ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH ADJUSTABLE BRAKE PEDALS, THE STOP LAMP SWITCH WIRING HARNESS MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED STOP LAMP SWITCH WIRING HARNESS COULD MAKE CONTACT WITH THE U-JOINT ASSEMBLY OF THE STEERING COLUMN. REPEATED CONTACT MAY EVENTUALLY CAUSE THE WIRING HARNESS INSULATION TO CHAFE. Built 2005-06-15 to 2006-05-18. |
| 06V265000 | 2006-07-19. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. ON CERTAIN PASSENGER VEHICLES, THE REAR CALIPER BRAKE HOSES MAY BE OUT OF POSITION. AN IMPROPERLY POSITIONED REAR CALIPER BRAKE HOSE MAY CONTACT REAR SUSPENSION COMPONENTS AND OVER TIME BREACH THE INTEGRITY OF THE HOSE. Built 2005-06-15 to 2006-03-10. |
| 2020064 | 2020-02-19. Brakes. Issue: On certain vehicles, moisture can enter the brake Hydraulic Electronic Control Unit (HECU) and cause a short circuit. Safety Risk: A short circuit could create a fire risk. This can happen even if the vehicle is parked. Corrective Actions: Kia will notify owners by mail and instruct you to take your vehicle to a dealer to install a relay to power off the HECU when the vehicle is turned off. Kia recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed. |
|---|---|
| 2016274 | 2016-06-02. Structure. On certain vehicles, the secondary hood latch could corrode, and may result in the mechanical binding of the latch. This could cause the secondary hood latch to remain in the open position when the hood is closed. If the vehicle were to be driven with the primary hood latch disengaged, there is a potential that the secondary hood latch may not hold the hood closed as designed while the vehicle is in motion. If this were to occur, it could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield. These issues could result in a crash causing injury and/or property damage. Correction: Dealers will replace the secondary latch with an improved secondary latch with an enhanced corrosion coating. |
| 2016273 | 2016-06-02. Suspension. On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: For 2006-2007 model year vehicles, dealers will replace the front lower control arms if they were not previously replaced under recall 2013-388. For 2008-2012 model year vehicles, dealers will inspect the control arms and either apply an anticorrosion treatment or replace the control arms, as necessary. Note: This recall supersedes recall 2013-388. |
| 2013388 | 2013-11-06. Suspension. On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect the control arms and either apply an anticorrosion treatment or replace control arms, as necessary. |
| 2009140 | 2009-05-14. Electrical. On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. This could prevent proper brake lamp operation. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. A malfunction of the switch may also cause the brake lamps to remain illuminated when the brake pedal is released. Additionally, a faulty switch may affect the operation of the brake-transmission shift interlock on automatic transmission-equipped vehicles so that the transmission shifter would not be able to be shifted out of PARK position. It may also cause the Electronic Stability Control (ESC) light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed. Correction: Dealers will replace the stop lamp switch assembly. |
| 2006264 | 2006-10-17. Lights And Instruments. On certain vehicles equipped with adjustable brake pedals, the stop lamp switch wiring harness may be out of position. An improperly positioned harness could make contact with the u-joint assembly of the steering column. Repeated contact may eventually cause the wiring harness insulation to chafe. An electrical short could result in the loss of brake lights, engine stalling, or an inability to start the vehicle. Correction: Dealers will reposition the wiring harness. |
| 2006191 | 2006-08-18. Brakes. On certain vehicles the rear brake caliper hoses may be out of position. This could allow contact with the rear suspension, resulting in loss of brake fluid and a reduction of braking ability causing a crash. Correction: Dealers will adjust or replace the hoses as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.