WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Kia Rio

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

89 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Heating and air conditioning are shown. Show all

Bulletins, newest first
PS4982017-08-02. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; VISIBILITY. PITSTOP: ANTI-CONDENSATION LOGIC ? NORMAL OPERATION, DISABLING, AND ENABLING - Some Kia vehicles starting with 2016MY and all Kia vehicles, after and including 2017MY, incorporate an anti-condensation logic to prevent the interior windows from becoming excessively fogged. The HVAC control head in these vehicles monitors ambient temperature to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature (about 60°F or below), the anti-condensation logic may automatically set the air intake mode to FRESH, depending on the other HVAC settings. The anti-condensation logic is also designed to ensure that air intake mode is set to FRESH, as long as all conditions are met. If the user changes the air intake to RECIRCULATION, the anti-condensation logic will take control again after 5 minutes, and change the air intake mode back to FRESH. If this results in an undesired operation, the logic may be enabled or disabled by following the procedure below.
TSB-CLI020R12017-08-02. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TSB: PASSENGER FLOOR WET DURING A/C OPERATION - This bulletin provides information relating to the possible presence of moisture on the passenger side floor during A/C operation on some Rio (UB) vehicles, produced from June 21, 2011 to March 10, 2016.
PS266R12017-02-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.