WenmarOpen by Wenmar Pro

Recalls that may apply to the 1997 Kenworth T2000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
01V0510002001-02-20. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. VEHICLE DESCRIPTION: VEHICLES EQUIPPED WITH 54" REAR AXLE SPACING CONFIGURATION OF THE AIRGLIDE 200 SUSPENSION WITH THE SERVICE APPLICATION IDENTIFIED AS LOGGER, DUMP TRUCK, OR TANKER. THE REAR SUSPENSION IS REGULARLY SUBJECTED TO EXTREME ARTICULATION, RESULTING IN FLEXING OF THE JOINT. Built 1996-02-19 to 2001-02-09.
98V1290001998-06-11. ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD. VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CATERPILLAR 3406E ENGINES. THE ROUTING OF THE ELECTRICAL AND FUEL LINES CAN CAUSE CHAFFING OF THE WIRING HARNESS ON THE FUEL LINE. Built 1996-06-01 to 1998-05-31.
97V1390001997-08-20. SUSPENSION:REAR. VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH KENWORTH AIRGLIDE 200 REAR SUSPENSION. DUE TO MATERIALS USED IN THE SWAY BAR ARMS AND STUDS AS WELL AS THE STUD PLATING MATERIAL, STRESS CORROSION CRACKING AND BENDING FATIGUE CAN OCCUR IN THE REAR SUSPENSION SWAY BAR ARMS AND STUDS CAUSING THE STUD TO FAIL PREMATURELY. Built 1995-08-14 to 1997-08-11.
97V0850001997-05-22. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. A SECONDARY BEND OPERATION WAS NOT PERFORMED DURING ASSEMBLY OF THE DOOR LATCH WHICH COULD CAUSE THE DOOR LATCH TO JAM WHEN LOCKED. Built 1996-09-23 to 1997-04-17.
Canada: Transport Canada, as of 2026-10-19
20011042001-05-16. Suspension. On certain vehicles, the rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint. Failure of the lower sway arm attaching bolts could result with possible loss of vehicle control. Correction: Dealers will replace the lower sway arm brackets.
19981281998-06-24. Fuel System. NOTE: INCLUDES 1996-98 T2000 AND ALL OTHER 1996-97 KENWORTH MODELS EQUIPPED WITH CATERPILLAR 3406E ENGINES. THE ROUTING OF THE ELECTRICAL AND FUEL LINES IN THE REFERENCED ENGINES CAN CAUSE RUBBING OF THE ENGINE/ALTERNATOR HARNESS ON THE FUEL LINE AND CAN RESULT IN AN ENGINE COMPARTMENT FIRE. CORRECTION: VEHICLES WILL BE INSPECTED AND, WHERE THERE IS EVIDENCE OF WEAR DUE TO RUBBING BETWEEN THE ELECTRICAL HARNESS AND FUEL LINES, THE ELECTRICAL HARNESS AND/OR FUEL LINES WILL BE REPLACED AND ROUTED CORRECTLY.
19971441997-08-19. Suspension. NOTE: VEHICLES EQUIPPED WITH AIRGLIDE 200 REAR SUSPENSION. DUE TO THE MATERIALS USED IN THE SWAY BAR ARMS AND THE STUDS AS WELL AS THE STUD PLATING, A COMBINATION OF STRESS CORROSION CRACKING AND BENDING FATIGUE CAN OCCUR WHICH COULD CAUSE THE STUD TO FAIL PREMATURELY. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A CRASH WITHOUT PRIOR WARNING. CORRECTION: SWAY BAR ARM ASSEMBLY WILL BE REPLACED WITH ONE OF A DIFFERENT MATERIAL. THE NEW STUDS WILL HAVE DIFFERENT THREADS AND A DIFFERENT FINISH.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.