Recalls that may apply to the 1991 Kenworth C500
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 03V126000 | 2003-03-31. SERVICE BRAKES, AIR. CERTAIN TRUCKS EQUIPPED WITH MERITOR P 18X7 BRAKES WITH 36" BRAKE CHAMBERS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 121, "AIR BRAKE SYSTEMS." THESE TRUCKS WERE MANUFACTURED WITH A COMBINED AIR RESERVOIR VOLUME LESS THAN 12 TIMES THE COMBINED VOLUME OF ALL SERVICE BRAKE CHAMBERS. Built 1991-01-21 to 2003-02-25. |
|---|---|
| 91V090000 | 1991-06-10. VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES. SPRAGUE WIPER ASSEMBLY PIVOT CAN SEIZE DUE TO GALVANIC CORROSION BETWEEN THE ZINC-PLATED STEEL SHAFT AND THE BRONZE BUSHINGS. Built 1988-05-01 to 1990-08-01. |
| 91V021000 | 1991-01-06. STEERING:LINKAGES. PITMAN ARM PINCH BOLTS MAY HAVE BEEN INADEQUATELY TORQUED. |
| 1991091 | 1991-06-11. Visual System. THE SPRAGUE WIPER ASSEMBLY PIVOT CAN SEIZE DUE TO GALVANIC CORROSION BETWEEN THE ZINC-PLATED STEEL SHAFT AND THE BRONZE BUSHING CAUSING THE WIPER ARM/BLADE ASSEMBLY TO STOP WIPING THE WINDSHIELD. THIS COULD CAUSE REDUCED DRIVER VISIBILITY DURING INCLEMENT WEATHER AND RESULT IN A VEHICLE CRASH. CORRECTION: SPRAGUE WIPER ASSEMBLY PIVOT WILL BE REPLACED WITH AN ASSEMBLY NOT SUSCEPTIBLE TO GALVANIC CORROSION. |
|---|
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.