WenmarOpen by Wenmar Pro

Service bulletins for the 2017 KARMA Revero

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

197 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
TB-17-12-372021-05-10. Service bulletin. ENGINE AND ENGINE COOLING. Verify correct installation of center exhaust, as we have found complaints of loud exhaust do to miss fitment
SC-17-20-082021-05-03. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. Inspection of Radiator and Fan Assembly
00.01.16.0011.032021-05-03. Service bulletin. ENGINE AND ENGINE COOLING. Traction Motor and Inverter Location and Nomenclature
TB-17-00-112019-09-16. Service bulletin. ENGINE. To provide corrective action for MIL illumination. Misfire codes.
TB-18-12-052018-12-17. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE. Downstream O2 sensor inspeciton 11.20.18
CC-17-20-072018-11-05. Service bulletin. ENGINE AND ENGINE COOLING. PTC fluid heater replacement procedure for select VINs
SC-17-20-082018-09-10. Service bulletin. ENGINE. On complaint Inspection of radiator fan and shroud mounting to minimize vibration.
TB-18-12-022018-06-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. exhuats adjusment, in rattle complaint this is a method to check and adjust the exhaust syetm as needed.
TB-18-20-032018-06-18. Service bulletin. ENGINE; EQUIPMENT; EQUIPMENT:MECHANICAL; ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. TB-18-20-03 Overmold clamp inspection, inspect for possible missing clamps on a hose assembly- installl new ones if needed.
SC-17-20-082018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. updated part number, a review of CRFM fan and vibraiton/noise remedy
SC-17-20-082018-05-29. Service bulletin. ENGINE AND ENGINE COOLING. updated part number, a review of CRFM fan and vibraiton/noise remedy
TB-18-12-022018-04-16. Service bulletin. ENGINE AND ENGINE COOLING. charge air cooler inspection- plumbing adjustment, ensure the charge air pipes are clean and installed properly
TB-18-20-022018-04-16. Service bulletin. ENGINE AND ENGINE COOLING. Sensor Harness Routing Inspection- make sure the sensor harness is routed properly around a coolant hose.
TB-17-12-192018-04-02. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. Intercooler Hose Clamp Inspection Revised 2-15-18 (repost for bulletin naming convention correction )
CC-17-20-072018-04-02. Service bulletin. ENGINE AND ENGINE COOLING. PTC heater replacement 2-15-18 (repost for bulletin naming convention correction)
CC-18-12-01 REVI2018-04-02. Service bulletin. ENGINE. CC-18-12-01 Oil Change Campaign - some vehicle may show false misfires, change the oil on these first revision
CC-18-30-012018-04-02. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER. AC line inspection , check the AC line for clearnace and slide on a nylon sheath to avoid the condition
CC-17-20-142018-04-02. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. Heater Hose Control Valve Install revised 2-1-18
CC-18-12-012018-04-02. Service bulletin. ENGINE. CC-18-12-01 Oil Change Campaign - some vehicle may show false misfires, change the oil on these first.
SC-18-01-012018-02-21. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; EQUIPMENT. EVAP System Inspection
TB-18-20-012018-02-21. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. Radiator Hose Clamp inspection
TB-17-12-372018-01-05. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Verify correct installation of center exhaust, as we have found complaints of loud exhaust do to miss fitment
TB-17-12-192017-10-15. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. Intercooler hose clamps may be mispositioned in manufacturing. This is an inspection bulletin to reseat clamps if needed.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.