WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jeep Wrangler

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

836 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
03002242024-03-18. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. Front and Rear Axle Sensor Kit **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? C1451-11 - Service Axle Locker System** Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition.
S23190000072024-01-08. Service bulletin. BACK OVER PREVENTION; STEERING:CRITICAL FASTENERS; STEERING. Squeak Noise From Dash Area When Turning The Steering Wheel.
90033572024-01-02. Service bulletin. BACK OVER PREVENTION. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
91001342024-01-02. Service bulletin. SERVICE BRAKES; FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION. Engine When replacing a GMET4 long block from a 2021 JL or older, you will need to carry over the injector wiring harness from the original engine, and the Fuel pressure sensor should be replaced with part number: 68212572AB.
91002472023-12-18. Service bulletin. BACK OVER PREVENTION; VEHICLE SPEED CONTROL. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt-related noise and/or noisy tensioner/pulley. Please refer to SOL# S2309000007.
S18080001522023-10-02. Service bulletin. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL; BACK OVER PREVENTION. CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance
91001332023-07-31. Service bulletin. BACK OVER PREVENTION. ROCKER ARM ASSY - ROLLER ROCKER Case 1.- Before replacing the intake or exhaust rocker arms due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head (no need to replace rocker arms). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. Case 2.- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
08-038-232023-02-13. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Radio Over The Air JR34.3 Updating to JR34.32.Software Version Customers may experience one or more of the following: Not be able to use Mobile Wi-Fi upon start up. Hotspot gives a no Internet connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from JR34.3 to JR34.32. NOTE: National launch for this FOTA update is expected to begin February 20, 2023.
08093212023-01-17. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. This is part of a two step FOTA update, first update brings software level to 22.61 and this second FOTA update will take the software to 22.64. National launch for this second step is May 24, 2021. Customers may experience one or more of the following:Navigation is incorrect or can not calculate route. GPS locations is inaccurate. Uconnect radio apps are all inoperable. Backup camera screen is blue (DT and KL). Green horizontal lines appear across screen (DT and KL). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio reset intermittently. Unable to adjust audio volume. Unable to switch modes between AM, FM, SAT or Media. In addition the following enhancements are included in this update:Carplay® connectivity improvement. Improvement to Bluetooth® phone pairing. Bluetooth devices unresponsive. Improved sound quality when using a Bluetooth phone.
24007212023-01-17. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION:SOFTWARE. Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
S20230000112023-01-17. Service bulletin. BACK OVER PREVENTION; VISIBILITY; VEHICLE SPEED CONTROL. Wind Noise And Or Gap At Front Door Mirror Flag
S21230000292023-01-17. Service bulletin. BACK OVER PREVENTION. Squeak and or Chirp Noise From Lift Gate Glass
08-003-22 REV. A2023-01-17. Service bulletin. STEERING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; BACK OVER PREVENTION. UAQ and UCQ Radio Enhancements Customers may experience one or more of the following: ? **Wi-Fi hotspot connection failure. ? Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. ? Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** ? Intermittent, black radio display screen (Rear View Camera (RVC) not affected). ? Intermittent, radio freezes (RVC not affected). ? Wireless connectivity pairing and/or connection issues. ? Lost radio presets. ? Radio channels change by itself. ? SXMT icon inoperative. ? SXMT favorite song not displaying/playing. ? Incorrect navigation address/location/directions. ? Backup camera has black display screen or only displays Check Entire Surroundings with black screen (occurs when vehicle is shifted immediately to reverse upon key-on before RVC signal is received, recoverable with key cycle) . ? High pitch chime noise. ? Contact list not loading. ? Device not supported message. ? Remote app inoperative. ? Travel-Link fuel price incorrect. ? Backup camera gridlines missing. ? Unable to adjust volume. In addition, the following enhancement are included in this update: ? Enables map updates. ? Heavy Duty (HD) Truck USB HUB improvements. ? HD Truck heated steering wheel improvements This bulletin involves inspecting and if required, updating the radio software level to 40.1. Depending on the radio?s current software level the radio may need a one or two USB update.
S20080001122023-01-09. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION; STRUCTURE:INTERIOR PANELS:DASHBOARD. MIL Lamp On Setting DTC?s P0441, P0456, P0457, P0440
S22230000292023-01-09. Service bulletin. BACK OVER PREVENTION. Rattle Noise From Door
91000102022-10-31. Service bulletin. POWER TRAIN:AXLE ASSEMBLY; WHEELS; BACK OVER PREVENTION. Axle Assembly A parts kit (SENSOR KIT, Axle: 68544629A$) is available to repair the Axle Locker Sensor on JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). This parts kit must be used when only the Axle Locker Sensor fails. Do not replace the axle for sensor failure.
08097202022-10-17. Service bulletin. BACK OVER PREVENTION:SOFTWARE. UAQ and UCQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.
S19080001592022-10-17. Service bulletin. BACK OVER PREVENTION. MIL Lamp On, DTC P0330 Knock Sensor 2 Circuit
S22230000292022-10-17. Service bulletin. BACK OVER PREVENTION. Rattle Noise From Door
S22230000012022-10-17. Service bulletin. POWER TRAIN; BACK OVER PREVENTION. Rattle Noise From Power Top Driving Over Bumps Or Rough Road
90044652022-10-17. Service bulletin. WHEELS; BACK OVER PREVENTION. AXLE, Service Rear A new parts kit (SENSOR KIT, Axle: 68544629AA) is available to repair the Axle Locker Sensor on the 2018 - 2022 JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). This new parts kit must be used when only the Axle Locker Sensor fails.
0800320REVE2022-09-26. Service bulletin. FORWARD COLLISION AVOIDANCE; LANE DEPARTURE; ELECTRICAL SYSTEM; BACK OVER PREVENTION. Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe the following:Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(Japan and South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.
0800320REVD2022-09-26. Service bulletin. LANE DEPARTURE; FORWARD COLLISION AVOIDANCE; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe the following:Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(Japan and South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.
0800320REVC2022-09-26. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; LANE DEPARTURE; FORWARD COLLISION AVOIDANCE. Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe the following:Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.
0800320REVB2022-09-26. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION; LANE DEPARTURE; FORWARD COLLISION AVOIDANCE. Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe the following: Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.