Service bulletins for the 2018 Jeep Wrangler
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
716 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Backup camera are shown. Show all
| S2223000029 | 2022-09-26. Service bulletin. BACK OVER PREVENTION. Rattle Noise From Door |
|---|---|
| 9004017 | 2022-09-15. Service bulletin. PARKING BRAKE; STRUCTURE; BACK OVER PREVENTION. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID to Bing Guo and Rafay Adil via email bingruo.guo@fcagroup.com (248) 500-7355 rafay.adil@fcagroup.com (248) 736-7059 Please call for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |
| S1918000008RevC | 2022-09-15. Service bulletin. BACK OVER PREVENTION. Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above. |
| 08-017-21 | 2022-07-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following: Radio display screen flickers. Clock loses 6 seconds per day (JL with 5 inch screen). Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth® device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7 on JL vehicles only). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto,® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop. |
| S1918000008 | 2022-05-31. Service bulletin. BACK OVER PREVENTION. Customer?s complaint may include a MIL-on with one or more of the following DTCs Active, Pending, or Stored in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 Bank 1 downstream O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above. |
| S2123000048 | 2022-05-31. Service bulletin. BACK OVER PREVENTION. Wind Whistle Noise From A Pillar Area At Highway Speed |
| S2123000079 | 2021-12-13. Service bulletin. STRUCTURE:BODY:DOOR; BACK OVER PREVENTION; VEHICLE SPEED CONTROL. Wind Noise And Or Water Leak From Door Seal Area |
| S2123000029 | 2021-06-28. Service bulletin. BACK OVER PREVENTION. Squeak and or Chirp Noise From Lift Gate Glass |
| 18-036-21 | 2021-05-24. Service bulletin. FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; SERVICE BRAKES. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P02EE - Cylinder 1 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02EF - Cylinder 2 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02F0 - Cylinder 3 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02F1 - Cylinder 4 Injector Circuit Performance(APAC, EMEA and LATAM Only). P2C90 - Crankcase Ventilation System - Hose "A" Disconnected(APAC, EMEA and LATAM Only). P04FC - Crankcase Ventilation System Performance(APAC, EMEA and LATAM Only). P2453 - Particulate Filter Pressure Sensor "A" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter(GPF)). P245F - Particulate Filter Pressure Sensor "B" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF)). P0456 - EVAP System Small Leak.If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). P050B - Cold Start Ignition Timing Performance(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). Customers may comment on one or more of the following:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. The following software enhancements are also included in this update:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update. |
| S2023000020 Rev. | 2021-05-24. Service bulletin. BACK OVER PREVENTION; POWER TRAIN. Tick Noise From A-pillar Front Power Top Side Rail |
| S2108000093 | 2021-05-24. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION; EQUIPMENT. Apple CarPlay Does Not Work Or Not Connecting |
| S2123000020 | 2021-05-24. Service bulletin. BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. A Buzz, Squeak, Rattle (BSR), Clicking Noise Heard From Left Side Of The Freedom Top. |
| 9004017 | 2021-04-26. Service bulletin. BACK OVER PREVENTION. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |
| 08-017-21 | 2021-02-16. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following: Radio display screen flickers. Clock loses 6 seconds per day (JL with 5 inch screen). Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth® device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7 on JL vehicles only). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto,® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop. |
| S2023000020 | 2020-05-26. Service bulletin. BACK OVER PREVENTION; POWER TRAIN. Tick Noise From A-pillar Front Power Top Side Rail |
| 18-014-20 REV. A | 2020-05-26. Service bulletin. FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING; ELECTRICAL SYSTEM; BACK OVER PREVENTION. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P0456 - EVAP System Small Leak.If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). P050B - Cold Start Ignition Timing Performance(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). Customers may experience:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient emperatures. Software enhancements include:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update. |
| S20230000017 | 2020-04-27. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES; BACK OVER PREVENTION. Whistle Wind Noise From Windshield Area. |
| S2008000012 | 2020-04-06. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Rear Park Assist Warning Chime, Rear Park Sense Unavailable Wipe Sensor Message While Backing Up No Object Present |
| 9004017 | 2019-12-16. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT; BACK OVER PREVENTION. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID to Bing Guo and Rafay Adil via email bingruo.guo@fcagroup.com (248) 500-7355 rafay.adil@fcagroup.com (248) 736-7059 Please call for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |
| 08-084-19 | 2019-10-28. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7) JL only. Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.