U3033 on the 2024 Jeep Wagoneer
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| 08-344-25 REV. A | 2025-11-26. Service bulletin. Security Gateway Module (SGW) Software Update he following software enhancements are available: ● Update for Diagnostic Trouble Code (DTC) U3033-00 - Control Module Security Certificate Missing/Invalid. NOTE: This DTC will not turn on the Malfunction Indicator Light (MIL) but is active or stored and cannot clear. ● If a FOTA message appears specifically directing the customer to service OR repeated FOTA events are not being completed, then a manual flash is required for the SGW update. ● SGW is not responding to diagnostics and showing offline This bulletin involves **inspecting and possibly** flashing the SGW to the latest software level in the case that the FOTA did not function. |
|---|---|
| 08-344-25 | 2025-10-29. Service bulletin. Security Gateway Module (SGW) Software Update he following software enhancements are available: ● Update for Diagnostic Trouble Code (DTC) U3033-00 - Control Module Security Certificate Missing/Invalid. NOTE: This DTC will not turn on the Malfunction Indicator Light (MIL) but is active or stored and cannot clear. ● If a FOTA message appears specifically directing the customer to service OR repeated FOTA events are not being completed, then a manual flash is required for the SGW update. ● SGW is not responding to diagnostics and showing offline. This bulletin involves flashing the SGW to the latest software level in the case that the FOTA did not function. |
| S2508000014 REV.B | 2025-04-03. Service bulletin. Security Gateway (SGW) Module is Setting Diagnostic Trouble Code (DTC) U3033-00 Control Module Security Certificate Missing or Invalid |
| S2508000014 REV.A | 2025-03-13. Service bulletin. Security Gateway (SGW) Module is Setting Diagnostic Trouble Code (DTC) U3033-00 Control Module Security Certificate Missing or Invalid |
| S2508000014 | 2025-02-11. Service bulletin. Security Gateway (SGW) Module is Setting Diagnostic Trouble Code (DTC) U3033-00 Control Module Security Certificate Missing or Invalid |
| 9100386 | 2024-07-11. Service bulletin. Security Gateway Module Battery Voltage - Circuit Voltage Below Threshold - DTC B2199-16 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. Battery Voltage - Circuit Voltage Above Threshold - DTC B2199-17 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. CAN Bus- [C-CAN1] (Node mute) or CAN Bus Off Performance- (Bus off failure) - Check DTC in DTC matrix Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration Ethernet Bus Failure - Check DTC Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration ECU-In-Plant-Mode - B235A-00 Repair Action: Install Calibration file with correct policy Ecu Internal Performance - Internal Electronic Failure - DTC B22A9-49 Repair Action: 1. If its in store clear and check again if DTC shows up. 2. Check battery voltage 3. Issue still exist then change ECU ECU Not Programmed / Flash Required (No Valid Application) - DTC C221C-00 Repair Action: 1. Reflash ECU with correct file Control Module Security Certificate Missing/Invalid - DTC U3033-00 or U3033-01 Repair Action: 1. Check connectivity 2. Ethernet network 3. Flash with the latest FOTA App Code 4. Flash the cert store with correct certificate 5. Clear Faults |
6 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.