WenmarOpen by Wenmar Pro

P060C on the 2022 Jeep Wagoneer

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

Bulletins for this model year that name P060C
18-068-262026-07-23. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0405-00 - Invalid Data Received From Cruise Control Module. ● U0104-00 - Lost Communication With Cruise Control Module. NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P06DD-00 - Engine Oil Pressure Control Circuit Stuck Off. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.
18-040-262026-03-25. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers **must** experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle **must** SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (In Active or Stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (In Active or Stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (In Active or Stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (In Active or Stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (In Active or Stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (In Active or Stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (In Active or Stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (In Active or Stored status). ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance (In Active or Stored status). ● P0604-00 - Internal Control Module Random Access Memory RAM Error (In Active or Stored status). ● P060C-00 - Internal Control Module Main Processor Performance (In Active or Stored status). ● U0104-00 - Lost Communication With Cruise Control Module **(In Active or Stored status)**. **Customers may also comment on the following:** ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** This bulletin involves reprogramming the PCM with the latest available software.
18-044-262026-03-25. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
18-040-262026-03-25. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers **must** experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle **must** SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (In Active or Stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (In Active or Stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (In Active or Stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (In Active or Stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (In Active or Stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (In Active or Stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (In Active or Stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (In Active or Stored status). ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance (In Active or Stored status). ● P0604-00 - Internal Control Module Random Access Memory RAM Error (In Active or Stored status). ● P060C-00 - Internal Control Module Main Processor Performance (In Active or Stored status). ● U0104-00 - Lost Communication With Cruise Control Module **(In Active or Stored status)**. **Customers may also comment on the following:** ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** This bulletin involves reprogramming the PCM with the latest available software.
18-024-252025-05-06. Service bulletin. "Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● **U0104 - Lost Communication with Cruise Control Module.** ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software. "
18002242024-03-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ? P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off.** ? P0604-00 - Internal Control Module Random Access Memory Ram Error. ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.
18058232024-01-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0604-00 - Internal Control Module Random Access Memory Ram Error. ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.
18058232023-12-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P0604-00 - Internal Control Module Random Access Memory Ram Error.** ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.

8 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.