WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Renegade

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

191 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
23-045-262026-09-30. Service bulletin. STRUCTURE:BODY. Not applicable to vehicles built for US market. Windshield Wiper Rattle Noise Customers may experience the following: SYMPTOM: ● Rattle Noise when the windshield wipers are active. **This bulletin involves replacing one or both front wiper arms and wiper blades**.
23-025-262026-07-18. Service bulletin. STRUCTURE:BODY. Not applicable to vehicles built for US market. Missing Hood Silencer Pad Customers may comment on the following: SYMPTOM: ● Hood silencer pad is missing. This bulletin is involves installing a hood silencer pad.
23-045-252025-12-17. Service bulletin. STRUCTURE:BODY. Not applicable to vehicles built for US market. Rear Doors Misaligned Customers may comment on the following: ● Rear doors misaligned with the fixed windows. This bulletin involves adjusting the rear door strikers.
23-041-252025-11-13. Service bulletin. STRUCTURE:BODY. Not applicable to vehicles built for US market. Glove Box Door Difficult To Close Customers may experience the following: ● The glove compartment door is difficult to close. This bulletin involves installing a washer spacer stack to correct glove compartment door alignment.
23-008-25 REV. A2025-09-24. Service bulletin. STRUCTURE:BODY. Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
23-017-252025-04-23. Service bulletin. STRUCTURE:BODY. "Rear Door Belt Molding Loose Customers may experience the following: ● The weather stripping (belt molding) on the rear doors is loose or detaching This bulletin involves possibly replacing one or both of the rear door sill moldings (belt moldings)."
23-016-252025-04-15. Service bulletin. STRUCTURE:BODY. "Rear Spoiler Loosening Customers may experience one or more of the following: ● Squeaking noise coming from the rear spoiler. ● Rear spoiler is loose. This bulletin involves installing a new spoiler"
23-008-252025-02-20. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. "
08-177-242024-08-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Power Folding Mirror Inoperative The power folding mirrors may intermittently not fold, or unfold. This bulletin involves replacing the power folding mirror/window switch assembly."
23-004-24 REV. A2024-08-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
31-001-242024-07-30. Service bulletin. STRUCTURE:BODY. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
23005242024-03-18. Service bulletin. STRUCTURE. Missing Underbody Protection Customers may experience the following: ? Missing left underbody panel This bulletin involves installation of the missing underbody panel.
31001232024-01-02. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
08043232023-09-25. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; STRUCTURE; POWER TRAIN. Power Folding Mirror Inoperative The customer may describe the power folding mirrors may intermittently not power fold or unfold. This bulletin involves replacing the power folding mirror/window switch assembly on the door.
31001232023-04-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001222023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
829752022-12-19. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. LATCH - FRONT DOOR
31001222022-10-31. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31001222022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.