WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Jeep Renegade

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

268 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
W202022-10-24. Service bulletin. POWER TRAIN. Powertrain Control Module.
S19080001022022-10-17. Service bulletin. POWER TRAIN. (Rev. A) Power Inverter Load Ratings
S17210000162022-10-17. Service bulletin. POWER TRAIN. Service 4wd Light On, Message AWD System Service Required
18044212022-10-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EXTERIOR LIGHTING; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
18044212022-10-17. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
S22080000732022-10-17. Service bulletin. POWER TRAIN. No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
CSNW202022-10-17. Service bulletin. POWER TRAIN. Customer Satisfaction Notification W20 Reprogram Powertrain Control Module
18054202022-09-26. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE; BACK OVER PREVENTION; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; EXTERIOR LIGHTING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0456 - EVAP System Small Leak. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0016 - Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1. P0606 - Control Module Processor. Customers may also experience the following:Vehicle periodically may fail to start(ED6 engine only).
W202022-09-26. Service bulletin. POWER TRAIN. Customer Satisfaction Notification W20 Reprogram Powertrain Control Module
S18210000012022-09-26. Service bulletin. POWER TRAIN. Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
90040092022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
08027212022-09-26. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. This software update also includes the following enhancementsReduce Rear Drive Module (RDM) noise during disconnect phase at speeds above 45 kph (28 mph)North America Only.
W20 Combo Phase22022-07-18. Service bulletin. POWER TRAIN. Customer Satisfaction Notification W20 Reprogram Powertrain Control Module
18-044-212021-06-28. Service bulletin. POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure.(North America only). P0456-00 - EVAP Purge System Small Leak.(North America only). P0441-00 - EVAP Purge System Performance.(North America only). P0440-00 - General EVAP System Failure. (North America only). P0455-00 - EVAP Purge System Large Leak.(North America only). P1CEA-00 - Boost Side EVAP Purge System Performance.(North America only). In addition, the following software enhancement is available: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(EMEA only). Updated EVAP system diagnostics.(North America only).
S2008000113 Rev.2021-05-24. Service bulletin. POWER TRAIN. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
08-027-212021-03-15. Service bulletin. POWER TRAIN. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. This software update also includes the following enhancementsReduce Rear Drive Module (RDM) noise during disconnect phase at speeds above 45 kph (28 mph)North America Only.
W20 Combo2021-03-01. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE. Customer Satisfaction Notification W20 Reprogram Powertrain Control Module
W20 Combo Phase22021-02-16. Service bulletin. POWER TRAIN. Customer Satisfaction Notification W20 Reprogram Powertrain Control Module
18-030-202020-05-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Diagnostic and System Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
S20080000202020-05-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. No Start, No Crank After PCM And RFHUB Replaced, DTC P0513 Invalid Skim Key Sets In The PCM
18-030-202020-04-27. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM. Flash: Powertrain Diagnostic and System Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
08-043-202020-04-27. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; ENGINE. Flash: Comfort Seat and Wheel Module (CSWM) Enhancements This bulletin involves updating the CSWM with the latest available software. The customer may describe the following:The heated steering wheel and heated seats, turn off when Engine Stop Start (ESS) activates.
21-014-202020-04-06. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience the following:Erratic or inconsistent shifting. Software enhancements include:Improved shift enhancements due to PCM improvements.
18-017-202020-04-06. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:P0238-00 - Positive Boost Pressure Governor Deviation Low Pressure Signal Calculation Failure. Customer may also notice:Erratic engine idle. Premature alternator pulley failure. Other software enhancements include:Improvement to avoid soot formation in the intake system that can cause engine speed oscillation at idle. Improvement to the alternator strategy to prevent alternator pulley failure.
18-082-192019-12-02. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience excessive oil consumption between oil change intervals.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.