Recalls that may apply to the 2002 Jeep Liberty
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Suspension are shown.
| 09V119000 | 2009-04-09. SUSPENSION:FRONT:CONTROL ARM. CHRYSLER IS RECALLING 42,469 MY 2002-2003 JEEP LIBERTY VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN SALT BELT STATES OF CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, KENTUCKY, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA , WISCONSIN AND THE DISTRICT OF COLUMBIA. THE FRONT SUSPENSION UPPER CONTROL ARM BALL JOINT MAY EXPERIENCE A LOSS OF LUBRICATION WHICH COULD LEAD TO CORROSION, ACCELERATED WEAR, AND POSSIBLE SEPARATION WHILE DRIVING. Built 2002-05-01 to 2002-09-30. |
|---|---|
| 06V288000 | 2006-08-03. SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT. ON CERTAIN TRUCKS, THE CONSTANT TENSION FRONT LOWER BALL JOINTS MAY EXPERIENCE CONTAMINATION. IF THE VEHICLE IS OPERATED FOR AN EXTENDED PERIOD WITH THIS CONDITION, THE BALL JOINT MAY EVENTUALLY EXPERIENCE WEAR AND LOOSENESS. Built 2001-01-02 to 2006-03-15. |
| 03V460000 | 2003-11-10. SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT. ON CERTAIN SPORT UTILITY VEHICLES, THE LOWER CONTROL ARM BALL JOINTS CAN EXPERIENCE A LOSS OF LUBRICATION THAT CAN LEAD TO CORROSION, ACCELERATED WEAR, AND POSSIBLE SEPARATION FROM THE STEERING KNUCKLE. Built 2001-01-02 to 2003-03-26. |
| 2009110 | 2009-04-14. Suspension. On certain vehicles, the front upper ball joints may experience a loss of lubrication which can lead to corrosion, accelerated wear and possible separation. Ball joint separation could cause a loss of vehicle control and a crash, resulting in property damage, personal injury or death. Correction: Dealers will replace the front suspension upper control arm assemblies. |
|---|---|
| 2003270 | 2003-11-07. Suspension. On certain vehicles, the front lower control arm ball joints may be susceptible to a loss of lubrication which can lead to corrosion, accelerated wear and possible separation from the steering knuckle. A ball joint which has separated from the knuckle, may result in a loss of vehicle directional control with minimal advanced warning. Correction: Dealers will replace both front lower ball joints and install ball joint boot heat shields on all 2002 and early 2003 model year vehicles. On later 2003 model year vehicles, the dealer will first inspect to determine if ball joint replacement is required. Any ball joints that do not pass the inspection will be replaced. All vehicles must have the ball joint boot heat shields installed. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.