P062B on the 2026 Jeep Grand Wagoneer
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| 18-074-26 REV. A | 2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2. ● P014A-00 - O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2. ● B1811-00 - Driver Door Ajar Input Circuit Low. ● B25C7-00 -Driver Door Ajar Switch 2 Circuit Low.** ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** The following software enhancements are also available: ● **Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0355-00 - Ignition Coil 5 Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
|---|---|
| 18-074-26 REV. A | 2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2. ● P014A-00 - O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2. ● B1811-00 - Driver Door Ajar Input Circuit Low. ● B25C7-00 -Driver Door Ajar Switch 2 Circuit Low.** ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** The following software enhancements are also available: ● **Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0355-00 - Ignition Coil 5 Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
| 18-074-26 | 2026-07-29. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Engine Stop/Start (ESS) inoperative with "Auto Stop Start Not Ready" message in Instrument Panel Cluster (IPC). The following software enhancements are also available: ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
| 18-044-26 | 2026-03-25. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi |
4 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.