Service bulletins for the 2026 Jeep Grand Wagoneer
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
198 on file from NHTSA, as of 2026-10-19.
About P014B on the 2026 Jeep Grand Wagoneer: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
Only bulletins with trouble code: P014B are shown. Show all
| 18-074-26 REV. A | 2026-10-16. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2. ● P014A-00 - O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2. ● B1811-00 - Driver Door Ajar Input Circuit Low. ● B25C7-00 -Driver Door Ajar Switch 2 Circuit Low.** ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** The following software enhancements are also available: ● **Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0355-00 - Ignition Coil 5 Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
|---|---|
| 18-074-26 REV. A | 2026-10-16. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2. ● P014A-00 - O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2. ● B1811-00 - Driver Door Ajar Input Circuit Low. ● B25C7-00 -Driver Door Ajar Switch 2 Circuit Low.** ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** The following software enhancements are also available: ● **Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0355-00 - Ignition Coil 5 Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
| 18-074-26 | 2026-07-29. Service bulletin. ENGINE; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2AF6-00 - Starter Relay 3 Stuck Off (with DBSM). ● P014B-00 - O2 Sensor 2-2 Delayed Response-Lean To Rich. ● P062B-00 - Internal Control Module Fuel Injector Control Performance. Customers may also comment on the following: ● Engine Stop/Start (ESS) inoperative with "Auto Stop Start Not Ready" message in Instrument Panel Cluster (IPC). The following software enhancements are also available: ● Update to enable Exhaust Gas Recirculation (EGR) disable during gear shift for smoother shifting. ● Update for the Brake System Control Module (BSCM) MIL illumination request not setting the MIL on the Powertrain Control Module (PCM). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.