WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

587 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Air bags are shown. Show all

Bulletins, newest first
S2623000052 REV. A2026-09-10. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM. Airbag Warning Light On or Intermittent. The Occupant Restraint Controller (ORC) May Have The Following DTCs (Active/Stored)
S26230000522026-08-13. Service bulletin. ELECTRICAL SYSTEM; AIR BAGS. Airbag Warning Light On or Intermittent. The Occupant Restraint Controller (ORC) May Have The Following DTCs (Active/Stored)
1114022026-05-06. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM. AIR BAG - DRIVER
1114032026-05-06. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM. AIR BAG - DRIVER
91003912024-07-24. Service bulletin. AIR BAGS. MODULE Occupant Restraint IF PROXI alignment is needed ONLY for the following parts please proceed with the next steps (68588647AB, 68611543AB, 68588646AC, 68620844AB, 68588637AB, 68588643AB, 68588638AC, 68620855AB, 68588639AB, 68588640AC, 68620856AB): 1. Unlock the ORC using the "Bosch WL ORC Lock Unlock Procedure" wiTECH Guided Diagnostic routine 2. Perform the "PROXI Configuration Alignment for the ORC" 3. Re-run the "Bosch WL ORC Lock Unlock Procedure" to Lock the ORC For a detailed explanation please refer to SOL S2308000016 Rev. B Do NOT perform the above steps if you have the following parts: 68675763AA, 68675777AA, 68675764AA, 68675765AA, 68631466AA, 68631463AA, 68631464AA, 68631465AA,
91003562024-06-14. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM. MODULE Occupant Restraint After Battery Drainage ORC do not work. Please follow the following steps. 1. Check ORC proxi, if the ORC is not aligned, perform proxi alignment, reset module. 2. If proxi is correct, reset module 3. Check for DTCs, and check wiring and components related to those DTCs and clear them.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.