WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1166 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
9003357a2023-04-17. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
90033572023-04-17. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
91001322023-04-17. Service bulletin. ENGINE AND ENGINE COOLING. ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
871472023-01-17. Service bulletin. AIR BAGS; ENGINE AND ENGINE COOLING; TIRES; ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM. It has been identified that the Vehicle Health Reports could at times report there is a vehicle issue which requires immediate service when there is not actually a vehicle issue.
91001032023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Engine Oil - 0W20,Fluid - ATF+4,Engine Oil - 10W30,Engine Oil - 5W20,Engine Oil - 5W30
S21090000042023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
90043902023-01-17. Service bulletin. STRUCTURE; ENGINE. COVER, Engine For WL equipped with 3.6L engines, the Limited and Laredo trim lines are not equipped from the factory with an engine cover. Overland and Summit are equipped from the factory with an engine cover. Engine cover installation is not reimbursable on a shortage and error claim on Limited and Laredo trim levels.
851352023-01-09. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; POWER TRAIN; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Warranty Bulletin D-22-03 Fast Feedback Program - Engine, Transmission, Axle Assemblies/Prop Shafts, Exhaust, Cooling, A/C, Brakes, Fuel, Electrical, PHEV Front-End Accessory Drive (FEAD) and EPT System Compoentns - 2022 and 2023 Jeep Grand Cherokee (WL) PHEV (Rev. A)
91000212023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Seal, Crankshaft Oil, Rear,Retainer, Crankshaft Oil Seal US dealers only: If you are replacing the rear main seal due to an oil leak, do NOT remove the seal from the retainer. Replace the seal and retainer (pn# 05086755A$) as a complete unit. Engineering needs to obtain the seals and retainers back for analysis without them having been disassembled. Once repairs are complete, please contact FCA Redacted Content to return the parts.
S22080000732023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
S22240000032023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. AC Does Not Blow Cold (Rev. A not indicated on final document)
TSB08043222023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. AC Does Not Blow Cold
90044872023-01-09. Service bulletin. STRUCTURE; ENGINE AND ENGINE COOLING; AIR BAGS; POWER TRAIN. Transmission Oil Pan and Gasket Assembly For Transmission oil leaks, need to identify exactly where the leak is coming from, please check the transmission case at the Trans Oil Heater (TOH) connection on the Grand Cherokee's. Also check the Trans Valve Body at the TCM harness connection. A black light can be used to identify trans fluid vs. other fluids. Contact FCA Redacted Content prior to replacing these components. If no response in 15 minutes, proceed with repair. Please email pictures of leak locations to FCA Redacted Content
S22090000042022-12-19. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
09012222022-12-12. Service bulletin. ENGINE AND ENGINE COOLING. Spark Knock/Engine Symptoms This bulletin involves cleaning the piston heads and cylinder head combustion chambersto resolve a spark knock condition being caused by oil intrusion through the PCV system. The customer may describe a knocking or pinging noise coming from the engine upon acceleration.
S228A0000302022-11-07. Service bulletin. ELECTRICAL SYSTEM:IGNITION; ENGINE; UNKNOWN OR OTHER; EQUIPMENT:ELECTRICAL. Battery Drain, Radio Or Cluster Will Not Shut Off After Engine Off
91000822022-11-07. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; WHEELS; EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID. STARTER, Engine Prior to starter removal: 1. Inspect and check all connections to the starter motor solenoid a. Unplug and plug-in the T50 1-way connector as needed to verify the connection is good & tight and check for any bent pin in the connection. b. Inspect the T30 connection (i.e. B+ M8 threaded stud & nut) for tightness to assure cable ring terminal connection is secured and tight (use torque spec per service manual). 2. Check/verify all grounds in the cranking circuit a. Check tightness of mounting bolts that secure starter to the engine block b. Check main ground from engine to chassis c. Check battery ground cable connections are clean and tight d.Potentially, loosen both starter motor bolts, without removing, and re-tighten to torque specifications in the service manual e. After all steps above are complete, attempt to crank the engine to verify if improvement has been made (i.e. the steps fixed the customer complaint) 3. Conduct the voltage drop test (starter feed circuit) per the service manual before removing the starter motor 4. Starter Removal: conduct the removal if above steps do not fix the complaint a. Conduct bench test by applying 12 volts to motor T30 and T50 connections (i.e. conduct simple free speed test) b. Free speed test should result in starter motor pinion travel to pinion stop and rotation with normal rotational noise (i.e. no grinding, scrapping, etc.) c. If any abnormal noise is present, replace the starter motor 5. During starter removal, also remove and replace the two starter mounting bolts. Return the bolts with starter motor for analysis at QEC and the supplier warranty analysis lab.
851352022-10-31. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. Warranty Bulletin D-22-03 Fast Feedback Program - Engine, Transmission, Axle Assemblies/Prop Shafts, Exhaust, Cooling, A/C, Brakes, Fuel, Electrical, PHEV Front-End Accessory Drive (FEAD) and EPT System Compoentns - 2022 and 2023 Jeep Grand Cherokee (WL) PHEV (Rev. A) (document published on 8/5/22 with incorrect date on communication of 8/4/22)
S22240000032022-10-17. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; ENGINE AND ENGINE COOLING. AC Does Not Blow Cold (Rev. A not indicated on final document)
90044872022-10-17. Service bulletin. AIR BAGS; STRUCTURE; ENGINE AND ENGINE COOLING; POWER TRAIN. Transmission Oil Pan and Gasket Assembly For Transmission oil leaks, need to identify exactly where the leak is coming from, please check the transmission case at the Trans Oil Heater (TOH) connection on the Grand Cherokee's. Also check the Trans Valve Body at the TCM harness connection. A black light can be used to identify trans fluid vs. other fluids. Contact FCA Redacted Content prior to replacing these components. If no response in 15 minutes, proceed with repair. Please email pictures of leak locations to FCA Redacted Content
S21090000052022-09-26. Service bulletin. ENGINE. Issue is engine cover not installed from the factory.
S21090000042022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
90043902022-09-26. Service bulletin. ENGINE; EQUIPMENT. COVER, Engine For WL equipped with 3.6L engines, the Limited and Laredo trim lines are not equipped from the factory with an engine cover. Overland and Summit are equipped from the factory with an engine cover. Engine cover installation is not reimbursable on a shortage and error claim on Limited and Laredo trim levels.
90045272022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Valve Cover Gasket It is advised to replace the full valve cover assembly if you are experiencing a valve cover leak Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI (right side) or 04893799AH (left side)includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content to facilitate fast track shipment of failed part.
S2008000023RevA2022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. No Crank No Start, Click No Start

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.