WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Jeep Grand Cherokee L

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

335 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
S2523000010 REV.A2025-04-03. Service bulletin. STRUCTURE:BODY. Exterior Rear View Mirror Stained And Will Not Clean.
S2424000003 REV.C2025-04-02. Service bulletin. UNKNOWN OR OTHER. AC REFRIGERANT EXPANSION VALVE ACTUATORAC INOP With DTC B3A11 - AC REFRIGERANT EXPANSION VALVE ACTUATOR CONTROL PERFORMANCE
1039532025-04-02. Service bulletin. UNKNOWN OR OTHER. VALVE - OIL CONTROL
S2509000001 REV.A2025-04-01. Service bulletin. ENGINE. Engine Rattle Noise
S258A0000112025-04-01. Service bulletin. UNKNOWN OR OTHER. Crackle, Pop or Growl noise At Start-up
91005342025-03-28. Service bulletin. POWER TRAIN. "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
S2424000003 REV.D2025-03-28. Service bulletin. UNKNOWN OR OTHER. AC INOP With DTC B3A11 - AC REFRIGERANT EXPANSION VALVE ACTUATOR CONTROL PERFORMANCE
91005322025-03-26. Service bulletin. STEERING; ELECTRICAL SYSTEM. "MODULE Steering Control Before replacing the steering column control module (SCCM) due to wipers inop, wipers not turning off, wipers not returning to position, heated steering wheel not working and/or steering controls inop, please follow these steps: 1.- Review if there is any active DTC. Refer to service library procedure and follow diagnosis steps. 2.- If failure still present, make sure all the switches', horn's, heated steering wheel, airbag's harness are properly connected and there is no corrosion or pinching, disconnect the switches & reconnect them, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between SCCM and BCM. For example, activate turn signals or wipers. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from horn, wipers or turn signal is requested and are working. 5.- Disconnect the SCCM fuse for around 30s,and repeat the previous steps to see if failure still present. 6.- Do a hard reset to BCM and evaluate if any DTC is set. Retest if failure still present. Review the active DTCs. 7.- Before replacing the SCCM disconnect it and reconnect it again. Note: Wipers position is not controlled by SCCM, verify motor wiper status if issue continues. If request from SCCM is sent to BCM, then verify if the communication to wipers is not working properly. If there are no DTC's active, physical defects, steering controls inop, wipers inop, heated steering wheel inop, then SCCM does not need to be replaced."
9100390 Rev 12025-03-19. Service bulletin. POWER TRAIN. "D Clutch Repair Kit For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
91004712025-03-19. Service bulletin. UNKNOWN OR OTHER. "CANISTER Vapor -If an issue is detected with the Evaporative System Integrity Module (ESIM) Detector and not the Vapor Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM."
08-063-252025-03-17. Service bulletin. ELECTRICAL SYSTEM. "Radio USB update to U33.43 Customers may experience one or more of the following: ● Unable to select the Turn by Turn Navigation. ● Blank Performance Pages (Rearview Camera (RVC) Functions Normally). ● Android Auto® Voice Recognition (VR) inoperative. ● Media tuner delayed. ● Charge Schedule not accepting updates via phone (RVC Functions Normally). ● Ambient light inoperative. ● Map in Instrument Panel Cluster (IPC) inoperative. ● Media Widget blank. ● Navigation map black. ● Off-Road Pages inoperative (RVC Functions Normally). ● VR inoperative. ● Incorrect song title displayed (Carplay® only). ● Radio display switches from Media Page to Home Page (RVC Functions Normally). ● Ghost touch on Navigation screen (RVC Functions Normally). ● Widgets missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the Camera View Pages (RVC Functions Normally). REPAIR SUMMARY: This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio’s current software level the radio may need a one or two USB update."
S2424000003 REV.C2025-03-14. Service bulletin. UNKNOWN OR OTHER. AC INOP With DTC B3A11 - AC REFRIGERANT EXPANSION VALVE ACTUATOR CONTROL PERFORMANCE
91005022025-03-07. Service bulletin. STRUCTURE:BODY. LOWER ACTIVE GRILL SHUTTER If the upper or lower AGS seems to be inop please make sure you CLEAR the DTCs BEFORE swapping the old AGS for a new one, and test if the error code returns. Very often the wiring harness presents corrosion, so make sure to check it for any damage BEFORE swapping the AGS. Corrosion in the harness disrupts communication with the AGS, which sets up the DTCs for AGS performance and lights the CEL. If the AGS is inop and it will be replaced and sent back to Stellantis also send back the wiring harness with it. Make sure to fully perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE as indicated in the service library.
S258A0000092025-03-07. Service bulletin. ELECTRICAL SYSTEM. Apple CarPlay Does Not Complete The First Initial Wireless Connection.
S25090000022025-03-07. Service bulletin. ENGINE. Engine Noise
S258A0000072025-03-07. Service bulletin. ELECTRICAL SYSTEM. Radio Display Screen Flicker
9100446 Rev 32025-03-05. Service bulletin. SUSPENSION. "Frt Stabilizer assembly(smartbar) BSR from the front end due to Smartbar (disconnecting front sway bar). Root cause was identified as anti-rotation bracket (connects the actuator to the stabar) coming loose due to inadequate clamp load at the joint and weld (holds the bolt shaft and bracket flange) was poorly designed. If any vehicle causes BSR because of this Bracket failure (loose joint/ bracket bends) DO NOT replace whole stabar assembly, instead replace with the service kit (PN#68730602AA). Dealer must need to order the parts from part ordering system for this claim. This kit contains 1 bracket (PN 68730603AA), 3 M10 Nut (PN 68730605AA), 2 M8X1.5 Bolt (PN 68730606AA) and 2 M10X1.5 bolt (PN 06513427AA). 1 M10 Bolt (PN 68730607AA). This kit will also contain a new torque instruction for the bolt which holds the clamp bracket to this failed anti-rotation bracket. DO NOT apply the old torque (45+/5Nm Direct torque). The new torque is Angle controlled torque monitor (20Nm Snug torque, 110 deg Angle, monitor torque within 40-70Nm). Please use Service Library for your reference."
9100498 REV 12025-03-05. Service bulletin. ENGINE. 3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.
S2423000008 REV.A2025-03-05. Service bulletin. ELECTRICAL SYSTEM. SOS Button Inoperative And Or Unavailable. B1552-2A Code Set.
S25230000162025-03-05. Service bulletin. STRUCTURE:BODY. Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
S2424000003 REV.B2025-03-05. Service bulletin. UNKNOWN OR OTHER. AC INOP With DTC B3A11 - AC REFRIGERANT EXPANSION VALVE ACTUATOR CONTROL PERFORMANCE
S2123000084 REV.A2025-03-05. Service bulletin. SEATS. 1st Row Seat Belt Retractor D-Ring Is Binding And Not Able To Rotate
S25130000012025-03-05. Service bulletin. STRUCTURE:BODY. Grille molding applique is sticking out at the headlamp
S2423000034 REV.A2025-03-05. Service bulletin. STRUCTURE:BODY. Defroster Grille Has Gaps And Or Is Not Sitting Flush.
1034762025-03-04. Service bulletin. POWER TRAIN. TRANSMISSION - 8 SPEED

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.