WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Gladiator

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

276 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
988612024-06-25. Other. STRUCTURE:BODY. WIPERUNIT - WINDSHIELD WIPER, BLADE - FRONT WIPER.
91003602024-06-24. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. SWITCH Power Window Before replacing the window switch, please follow these steps: 1.- Review the master window Switch for any physical issue (Button stuck, broke). If not, physical issue is found move to next step 2.- Make sure all the switches harness are properly connected, disconnect the switch and reconnect it, and reverify the issue. If after performing these steps the switch remains faulty, please replace the switch
S1723000037 REV.A2024-06-11. Service bulletin. STRUCTURE:BODY. Freedom Panel Underside Rough And Or White Coating Flaking
S24230000292024-06-05. Service bulletin. STRUCTURE:BODY. Water Leaking Near Front Bulkhead Or Cowl Area On Driver’s Side.
S24230000012024-03-18. Service bulletin. STRUCTURE. Rear Cab Silencer Trim Panel Servicing.
91002182023-12-18. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Body Control Module For concern related to DTC U0140 - Lost Communication with Body Control Module, please follow published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include: Amplifier(AMP),IPC,HVAC,Radio,Digital TV,TPM,PCM,ORC,DTCM,SCCM,CVPM,EHPS,ICS,PTCM,OCM,PTS,PAM,DAS,DPDM,CSWM,ESM,ABS,PSSM,EAM,TBM,HCP,RF Hub,ASBS,LBSS,RBSS,AHLM,ITM,TCM. *Ensure to check all the wiring harness connected to BCM with Other Modules are proper. *Please disconnect the Battery Negative Cable for 15 minutes and then reconnect. *Clear the codes and check to see if any active DTC's return for U0140 *If still DTCs U0140 presents then contact Engineering Expert: FCA Redacted Content

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.