WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Gladiator

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

276 on file from NHTSA, as of 2026-10-19.

About P0152 on the 2024 Jeep Gladiator: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P0152 are shown. Show all

Bulletins, newest first
18-049-25 REV. A2025-07-23. Service bulletin. ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates ustomers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation. ● P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream. ● P0158 - O2 Sensor 2/2 Circuit High. ● P0152 - O2 Sensor 2/1 Circuit High. ● P2504 - Charging System Output High. ● P0563 - Battery/System Voltage High. Customers may also experience one or more of the following: ● **Vehicle goes in limp mode within 1.6 km (1 mi) of driving while in 4LO, DTC P08A6 active and "Clutch Too Hot" message followed by "Service Transmission” message in the Instrument Panel Cluster (IPC).** ● The engine runs rough This bulletin involves reprogramming the PCM with the latest available software.
18-049-252025-07-17. Service bulletin. UNKNOWN OR OTHER. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation.** ● P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream. ● P0158 - O2 Sensor 2/2 circuit high. ● P0152 - O2 Sensor 2/1 circuit high. ● P2504 - Charging system output high. ● P0563 - Battery/system voltage high. Customers may also experience the following: ● **"Service Transmission” message on in the Instrument Panel Cluster (IPC).** ● The engine runs rough. This bulletin involves reprogramming the PCM with the latest available software.
18-044-242024-06-06. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1129 - closed loop fueling not achieved - Bank 2 Upstream. ● P0158 - O2 Sensor 2/2 circuit high. ● P0152 - O2 Sensor 2/1 circuit high. ● P2504 - Charging system output high. ● P0563 - Battery/system voltage high. Customers may also experience the following: ● The engine runs rough. This bulletin involves reprogramming the PCM with the latest available software."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.