WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Jeep Compass

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

266 on file from NHTSA, as of 2026-10-19.

About C10D0 on the 2025 Jeep Compass: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: C10D0 are shown. Show all

Bulletins, newest first
08-314-262026-09-03. Service bulletin. ELECTRICAL SYSTEM. Headlamp And Dash Wiring Not Secure Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10D0 - Electronic Park Brake System Failure. ● C10EA - 01 Left Park Brake Actuator - General Electrical Failure. ● C10D0 - 4B Electronic Park Brake Module - Over Temperature. ● C10D0 - 92 Electronic Park Brake Module-Performance or Incorrect Operation. ● C10D0 - 9A Electronic Park Brake Module-Component or System Operating Conditions. ● C2222 - 68 Improper Power Down-Event Information. ● U2006 - 64 EPB Status - Signal Plausibility Failure. NOTE: The above DTCs will only occur when there has been wire damage. Repair the damage following published repair methods. Submit repair claims following standard Warranty repair methods. Customers may also experience one or more of the following: ● 'Service Electric Park Brake' message on in Instrument Panel Cluster (IPC). ● Multiple warning lamps on. ● Vehicle does not start. This bulletin involves inspecting and possibly rerouting and securing a wiring harness.
91007832026-03-18. Service bulletin. ELECTRICAL SYSTEM. MP park brake light on and service park brake message on the cluster. The following DTCs can be present C10D0 - Electronic Park Brake System Failure C10ED - Electronic Park Brake Switch LED C10CD - Electronic Park Brake Switch - General Electrical Failure 1. Check there is no lose connection on the Park Brake Switch 2. Check there is no damage in connector D3863A, specially for the following circuits: - D497 - B65 Note: There is a reported issue on the harness from the Antilock Brake System (ABS), the harness is being damaged by a TCM bracket. If there is an issue found on the harness, DO NOT replace the Park Brake Switch. Repair instructions are documented in SOL S2508000069 3. If there are no issues found on the harness and switch is replaced. Please send the part to QEC
08-068-252025-03-24. Service bulletin. SERVICE BRAKES. "Plant Mode Activated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C170C-00 - PBC (Event PBC Factory Mode). ● C1436-86 - Electric Parking Brake System Fail. ● C10D0 - Electronic Park Brake System Failure. Customers may experience one or more of the following: ● Vehicle does not accelerate properly. ● Anti-Lock Brakes System (ABS) warning light on. This bulletin involves replacing the ABS Modul
08-176-242024-08-06. Service bulletin. SERVICE BRAKES. "Plant Mode Activated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C170C-00 - PBC (Event PBC Factory Mode). ● C1436-86 - Electric Parking Brake System Fail. ● C10D0 - Electronic Park Brake System Failure. Customers may experience one or more of the following: ● Vehicle does not accelerate properly. ● Anti-Lock Brakes System (ABS) warning light on. This bulletin involves replacing the ABS Module."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.