WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Compass

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

392 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
23054232023-07-31. Service bulletin. STRUCTURE:BODY:BUMPERS. Paint Peeling on Front Bumper The customers may complain about paint peeling on the front bumper on vehicles with polar white color paint. This bulletin involves repainting the area of the front bumper that is peeling.
08096232023-05-30. Service bulletin. STRUCTURE; STRUCTURE:BODY:HOOD; ELECTRICAL SYSTEM. Hood Ajar Switch Inoperative The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): ? P152E - Engine Hood Switch 2 Circuit High. Customers may also experience: ? Start/Stop system warning light. ? Start/Stop inoperable. ? Remote start inoperable. This bulletin involves replacing the hood ajar switch.
31001232023-04-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
23-004-23 REV. A2023-02-13. Service bulletin. STRUCTURE; BACK OVER PREVENTION. Potential Sunroof Noise Customers may comment on the following: Audible sound coming from the rear sunroof area over rough roads This bulletin involves inspecting for noise and possibly sealing the gap between the rear roof frame panels.
23-007-232023-02-13. Service bulletin. EQUIPMENT; STRUCTURE. Incorrect Front Grille Customers may comment on the following: The center grille section is unfinished (smooth / not grained) This bulletin involves replacing the center grille.
23-004-232023-02-13. Service bulletin. BACK OVER PREVENTION; STRUCTURE. Potential Sunroof Noise Customers may comment on the following: Audible sound coming from the rear sunroof area over rough roads. This bulletin involves inspecting for noise and possibly sealing the gap between the rear roof frame panels.
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001222023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
829752022-12-19. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. LATCH - FRONT DOOR
31001222022-10-31. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31001222022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.