WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Compass

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

392 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
91009002026-09-17. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
07-005-262026-07-29. Service bulletin. STRUCTURE:BODY; ENGINE. Not applicable to vehicles built for US market. M1 H1 Coolant Leak Customers may comment on one or more of the following: SYMPTOM: ● Possible overheat light on instrument cluster. ● Coolant leak from hose that contacts exhaust heat shield. This bulletin involves replacing an engine coolant hose.
S26230000402026-06-16. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
S2523000003 REV.A2026-04-29. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Door Latch, Handle And Ajar Additional Service Information.
S26230000072026-03-05. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. The Handsfree Kick Feature Does Not Work Or Works Intermittently.
9100591 Rev 12026-03-05. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Universal Garage Door Opener Prior to replacing the UGDO or sun visor, call HomeLink® Customer Care at 1-800-355-3515 for a proper evaluation of the issue. If this does not correct the issue, please follow the steps in SOL: S2508000039
08-075-262026-03-05. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
S26230000072026-02-19. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. The Handsfree Kick Feature Does Not Work Or Works Intermittently.
1092302026-01-14. Service bulletin. STRUCTURE:BODY. LATCH - LIFTGATE
23-045-252025-12-17. Service bulletin. STRUCTURE:BODY. Not applicable to vehicles built for US market. Rear Doors Misaligned Customers may comment on the following: ● Rear doors misaligned with the fixed windows. This bulletin involves adjusting the rear door strikers.
23-008-25 REV. A2025-09-24. Service bulletin. STRUCTURE:BODY. Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
1057702025-08-06. Service bulletin. STRUCTURE:BODY. PROP - LIFTGATE
08-220-252025-07-31. Service bulletin. STRUCTURE:BODY. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
23-008-252025-02-20. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. "
S25230000032025-01-16. Service bulletin. STRUCTURE:BODY. Door Latch, Handle And Ajar Additional Service Information.
08-219-242024-10-08. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. "Rear Windshield Wipers Operate Continuously Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U1046-00 - LIN 4 Bus. ● U0140-00 - Lost Communication With Body Control Module. ● U121E-00 - Lost Communication With Steering Wheel Cruise Control Switch. Customers may also comment on one or more of the following: ● Rear windshield wipers will continue to operate after the windshield wiper switch is turned to OFF. ● Electronic Vehicle Information Center (EVIC) is flashing. ● The front windows may not operate. CAUSE: Body Control Module (BCM) water intrusion This bulletin involves inspecting the BCM for water intrusion, replacing the BCM if needed, and replacing and rerouting a washer hose assembly."
23-004-24 REV. A2024-08-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
91003982024-08-01. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. SWITCH Power Window Before replacing the master window switch (Driver door window switch), please follow these steps: 1.- Review the master window Switch for any physical issue (Button stuck, broke). If not, physical issue is found move to next step 2.- Review window switch internal resistors, and make sure it matches the continuity chart found on service info of the switch. (649 +/- 7 Ohms when pushing UP, 2519 +/- 25 Ohms when pushing down) If an issue is found with the internal resistor or on the physical parts of the switch, please replace the switch.
31-001-242024-07-30. Service bulletin. STRUCTURE:BODY. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
08-153-242024-07-02. Service bulletin. STRUCTURE:BODY. "Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing."
31001232024-01-02. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
23056232023-07-31. Service bulletin. STRUCTURE:BODY:DOOR. Front Door Panel Noise When Closing Customers may comment on the following: ? Front door panel noise when closing front door(s). This bulletin involves inspecting for noise and possibly tightening the mounting screw on the door panel(s).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.