WenmarOpen by Wenmar Pro

Service bulletins for the 2008 Isuzu H-Series

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

154 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
01-06-01-011P2024-09-05. Service bulletin. ENGINE. This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
15-00-89-004G2024-05-15. Service bulletin. ENGINE; SUSPENSION; POWER TRAIN. This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
03-00-91-001I2023-11-22. Service bulletin. WHEELS; POWER TRAIN; STEERING; SUSPENSION; ENGINE AND ENGINE COOLING. This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
WB11-X-001A2023-11-06. Service bulletin. ENGINE AND ENGINE COOLING. The following information is provided to clearly explain Isuzu’s policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include, but are not limited to: model year change, software corrections, certification compliance, product improvement and specific application requirements. However, the mere existence of a newer control module calibration does not necessarily mean that warranty coverage exists or that the calibration must be installed. It is not our policy to update control modules, under warranty or after warranty, based solely on the availability of a newer calibration file. Below are our guidelines for reprogramming control modules.
22-NA-0092022-10-12. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
10-06-05-002K2022-10-11. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING. This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
06-00-89-031H2022-10-11. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
05-06-04-022T2022-10-11. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE. This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
04-06-04-051G2022-10-08. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
22-NA-0092022-07-01. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
22NA0092022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
22-NA-0742022-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
22-NA-0092022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
06-00-89-031D2021-09-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
PIP5540G2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5628C2020-11-16. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIP5226D2020-08-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP5628B2020-06-15. Service bulletin. ENGINE. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIC5650G2020-05-11. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5540F2020-02-10. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5540E2019-11-12. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
16NA3832019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
PIP56402019-06-10. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
PIP5226C2019-06-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.