Service bulletins for the 2020 Hyundai Veloster N
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
12 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with type: Service bulletin are shown. Show all
| 26-EM-016H TSB | 2026-10-14. Service bulletin. ENGINE. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision. |
|---|---|
| 26-EM-015H TSB | 2026-10-13. Service bulletin. ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level. |
| 25-BD-012H TSB | 2025-11-12. Service bulletin. EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation. |
| 24-EM-010H | 2024-12-21. Service bulletin. ENGINE. Certain Elantra N (CN7 N), Kona N (OS N), and Veloster N (JS N) vehicles may have DTC P1326 set due to water intrusion in the knock sensor connector during heavy rain or car wash conditions. There is no abnormal engine noise present, and the vehicle may enter “limp home” mode. |
| 24-ST-001H | 2024-12-14. Service bulletin. WHEELS. N Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicle’s steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed. Additionally, the summer tires on the N vehicles can make the shudder or vibration more pronounced in cold ambient conditions. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.