WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Hyundai Kona

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

45 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
26-EM-016H TSB2026-10-14. Service bulletin. ENGINE. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision.
26-EM-015H TSB2026-10-13. Service bulletin. ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
26-EE-003H TSB2026-04-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.
25-EM-007H TSB2026-01-06. Service bulletin. ENGINE. Some Elantra (CN7, CN7A), Kona (OS, SX2), and Sonata Hybrid (DN8 HEV) vehicles equipped with 2.0L engines may illuminate a warning lamp for DTC P218100 (Cooling System Performance) related to the Integrated Thermal-Management Module (ITM). Follow the service procedure in this bulletin to install a spring onto the thermostat within the ITM, in order to prevent premature opening, and perform an ECU software update on affected vehicles.
24-FL-003H2024-04-02. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin contains the software update procedure for the Engine Control Unit (ECU) on certain 2021-2023MY Elantra (CN7) and 2022-2023MY Kona (OS) vehicles equipped with the 1.6 liter T-GDI Gamma 2 engine, that may exhibit a warning lamp with one or more of the DTCs listed below: • P250F - Engine Oil Level Too Low • P011B, P050C - Engine Coolant Temperature/intake Air Temperature Correlation • P00B7, P2B60 - Engine Coolant Flow Low/Performance
23-EM-005H2023-12-15. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
23-BR-002H2023-10-02. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This bulletin provides the procedure for updating the software of the Electronic Stability Control (ESC) on 2022 – 2023MY Kona (OS) 1.6L turbo models equipped with smart cruise control. In certain Konas when using smart cruise control (SCC), there can be a delayed acceleration response to achieve the set (higher) speed, for example, after the slower vehicle ahead departs the lane. SCC Set Speed 74 to 80 MPH Vehicle Speed 62 to 74 MPH
23-EM-004H2023-10-02. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Certain 2023MY Kona (OS) and Elantra (CN7) vehicles equipped with the 2.0L Nu Atkinson engine may experience a warning lamp illumination for a diagnostic trouble code P250C that is related to the oil level sensor circuit. Follow the service procedure outlined in this bulletin to reprogram the powertrain control module to update the oil level sensor warning light logic. • DTC P250C - “Engine Oil Level Sensor Circuit Low”

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.