WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Hyundai Elantra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

29 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
26-EM-016H TSB2026-10-14. Service bulletin. ENGINE. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision.
26-EM-015H TSB2026-10-13. Service bulletin. ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
26-GI-002H TSB2026-06-06. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
26-EM-006H TSB2026-03-11. Service bulletin. ENGINE. Some Elantra (CN7) vehicles equipped with the 2.0L AKS NU PE engine may exhibit an illuminated Check Engine light for diagnostic trouble code (DTC) P218100 or P013300 which are related to the Integrated Thermal Management Module (ITM) and Oxygen Sensor monitoring. This bulletin provides instructions to update the Engine Control Module (ECM) logic to resolve the condition.
26-AD-001H TSB2026-03-07. Service bulletin. FORWARD COLLISION AVOIDANCE: WARNINGS; LANE DEPARTURE: ASSIST; EXTERIOR LIGHTING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: WARNING. Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
26-EM-007H TSB2026-03-07. Service bulletin. STEERING; ENGINE. Some Elantra (CN7) vehicles may exhibit vibration in the steering wheel when the cooling fan is operated at high speed. Follow the service procedure in this TSB to inspect and replace the engine cooling fan if this vibration is present.
26-HA-001H TSB2026-02-05. Service bulletin. UNKNOWN OR OTHER. Some Elantra (CN7/CN7A), Elantra N (CN7 N) and Elantra Hybrid (CN7 HEV) vehicles may experience the following conditions: • Lack of airflow coming from the forward-facing center vents • Mode actuator not changing airflow direction after various inputs • Popping/snap noise when switching between different modes If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator lever and cam mode guide.
25-BD-012H TSB2025-11-12. Service bulletin. EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020H TSB2025-10-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-FL-003H2025-06-03. Service bulletin. FUEL/PROPULSION SYSTEM. Certain Elantra (CN7), Elantra N (CN7 N), Elantra (CN7A) vehicles may experience a thudding noise coming from the fuel tank assembly at idle or on an incline when the PCSV (Purge Control Solenoid Valve) is operating, and fuel level is above 90% full. If the noise is heard, follow the service procedure to replace the fuel tank assembly and resolve the concern.
25-BE-002H TSB2025-06-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
25-EM-003H2025-05-02. Service bulletin. ENGINE. Certain 2024MY Elantra (CN7) vehicles may produce a coolant leak from the Heat Exchange Port on the Integrated Thermal Management (ITM) Module assembly. Follow the procedure outlined in this TSB to replace the Heat Exchange Port at the ITM assembly.
25-HA-001H2025-03-11. Service bulletin. UNKNOWN OR OTHER. Certain Elantra (CN7 and CN7A) vehicles may experience the following conditions: • Lack of airflow coming from the forward-facing center vents • Mode actuator not changing airflow direction after various inputs • Popping/snap noise when switching between different modes If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator lever.
24-EM-011H2024-12-03. Service bulletin. ENGINE. Certain 2024MY Elantra (CN7) vehicles may produce a coolant leak from the Heat Exchange Port on the Integrated Thermal Management (ITM) Module assembly. Follow the procedure outlined in this TSB to replace the Heat Exchange Port at the ITM assembly.
24-01-042H2024-06-05. Service bulletin. WHEELS. Some 2023MY Elantra N (CN7 N) and 2023-2024MY Elantra Hybrid (CN7 HEV) vehicles may have sealant leakage in the Tire Mobility Kit (TMK). The leakage may contaminate other parts inside or outside of the TMK bag. Follow the procedure in this bulletin to determine if the sealant is leaking and, if necessary, replace any parts that have been contaminated. If the sealant has not leaked, replace only the TMK Sealant Cap.
24-BD-001H2024-03-05. Service bulletin. VISIBILITY; VISIBILITY/WIPER. This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
23-EM-005H2023-12-15. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.