WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Hyundai Elantra N

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

24 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
26-EM-016H TSB2026-10-14. Service bulletin. ENGINE. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision.
26-EM-015H TSB2026-10-13. Service bulletin. ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
26-AT-004H TSB2026-06-16. Service bulletin. POWER TRAIN. This bulletin provides information related to a Transmission Control Unit (TCU) software update for some vehicles equipped with an 8-speed wet dual clutch transmission (8WDCT). The software update revises the touch point learning variation, improving drivability and judder symptoms. Certain 8WDCTs (indicated by a new part number) received an updated clutch spring. The correct TCU software update must be matched with the correct corresponding 8WDCT hardware, otherwise, drivability concerns may occur. This service procedure should be performed prior to any 8WDCT replacements done for drivability/judder concerns.
26-GI-002H TSB2026-06-06. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
26-AD-001H TSB2026-03-07. Service bulletin. FORWARD COLLISION AVOIDANCE: WARNINGS; LANE DEPARTURE: ASSIST; EXTERIOR LIGHTING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: WARNING. Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
26-HA-001H TSB2026-02-05. Service bulletin. UNKNOWN OR OTHER. Some Elantra (CN7/CN7A), Elantra N (CN7 N) and Elantra Hybrid (CN7 HEV) vehicles may experience the following conditions: • Lack of airflow coming from the forward-facing center vents • Mode actuator not changing airflow direction after various inputs • Popping/snap noise when switching between different modes If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator lever and cam mode guide.
25-BD-012H TSB2025-11-12. Service bulletin. EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020H TSB2025-10-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-FL-003H2025-06-03. Service bulletin. FUEL/PROPULSION SYSTEM. Certain Elantra (CN7), Elantra N (CN7 N), Elantra (CN7A) vehicles may experience a thudding noise coming from the fuel tank assembly at idle or on an incline when the PCSV (Purge Control Solenoid Valve) is operating, and fuel level is above 90% full. If the noise is heard, follow the service procedure to replace the fuel tank assembly and resolve the concern.
25-BE-002H TSB2025-06-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
24-EM-010H2024-12-21. Service bulletin. ENGINE. Certain Elantra N (CN7 N), Kona N (OS N), and Veloster N (JS N) vehicles may have DTC P1326 set due to water intrusion in the knock sensor connector during heavy rain or car wash conditions. There is no abnormal engine noise present, and the vehicle may enter “limp home” mode.
24-ST-001H2024-12-14. Service bulletin. WHEELS. N Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicle’s steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed. Additionally, the summer tires on the N vehicles can make the shudder or vibration more pronounced in cold ambient conditions.
24-BD-001H2024-03-05. Service bulletin. VISIBILITY; VISIBILITY/WIPER. This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
23-EM-005H2023-12-15. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.