Service bulletins for the 2016 Hyundai Accent
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
76 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Engine are shown. Show all
| 26-EM-016H TSB | 2026-10-14. Service bulletin. ENGINE. Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision. |
|---|---|
| 26-EM-015H TSB | 2026-10-13. Service bulletin. ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level. |
| 23-EM-005H | 2023-12-15. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services. |
| 22-EM-010H | 2022-08-05. Service bulletin. ENGINE AND ENGINE COOLING. Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. |
| 21-EM-004H | 2021-04-07. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 21-EM-003H | 2021-04-06. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 19-AT-015H | 2019-09-30. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness |
| 5NP-R8G4T-07 | 2018-07-16. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Certain 2012-2016 1.6L VELOSTER (FS) vehicles may experience a check engine warning light with the following DTC(s) found stored in the Engine Control Module (ECM): ? DTC P0455 - Evaporative emission system-Leak detected (Large leak) ? DTC P0456 - Evaporative System (EVAP) - Very Small Leak ? DTC P0449 - Canister Closed Valve (CCV) - Restricted Vent Circuit ? DTC P0451 - Fuel Tank PSI Sensor (FTPS / DPS) - Range Performance (No FTPS Change) There are no drivability symptoms associated with these DTC(s). |
| 5NP-U4G9Q-03 | 2017-08-10. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE. Hyundai Motor America is conducting a Service Campaign to update the ECM software on certain 2016 Model Year Accent and Veloster vehicles. Service Campaign T1S provides a procedure to update the ECM software. |
| 5NP-M6E8A-03 | 2017-08-10. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING. This bulletin provides information related to ECM (Engine Control Module) software update for diagnostic trouble code (DTC) P0441 - Canister Purge Valve (CPV) - Incorrect CPV Flow. There is no vehicle performance concern associated with this condition. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.