WenmarOpen by Wenmar Pro

Recalls that may apply to the 2000 Honda Accord

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
20V0270002020-01-17. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE. Honda (American Honda Motor Co.) is recalling certain 2001-2002 Acura 3.2CL, 2000-2003 Acura 3.5RL, 2000-2001 Acura 3.2TL, Honda CR-V and Honda Odyssey, 2001-2002 Acura MDX and 2000 Accord Coupe, Accord Sedan, Civic Coupe, and Civic Sedan vehicles. These vehicles may have received a replacement driver frontal air bag module as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
20V0260002020-01-17. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE. Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
05V0250002005-01-28. ELECTRICAL SYSTEM:IGNITION:SWITCH. ON CERTAIN PASSENGER VEHICLES, THE INTERLOCK OPERATION OF THE IGNITION SWITCH MAY NOT FUNCTION PROPERLY, MAKING IT POSSIBLE TO TURN THE IGNITION KEY TO THE "OFF" POSITION AND REMOVE THE KEY WITHOUT SHIFTING THE TRANSMISSION TO PARK. Built 1999-02-25 to 1999-07-30.
04V2560002004-06-07. INTERIOR LIGHTING. ON CERTAIN PASSENGER VEHICLES, THE DIMMER CONTROL FOR THE INSTRUMENT PANEL LIGHTS COULD FAIL DUE TO HEAT BUILDUP. Built 1999-05-11 to 2000-08-21.
02V0800002002-03-14. AIR BAGS:FRONTAL. ON CERTAIN PASSENGER VEHICLES, A COMPONENT IN THE INFLATOR OF SOME PASSENGER AIR BAG MODULES WAS NOT WELDED PROPERLY. Built 1999-09-03 to 2000-05-04.
02V0510002002-02-08. SEAT BELTS:FRONT:BUCKLE ASSEMBLY. CERTAIN SEDANS AND COUPES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." CERTAIN REAR SEAT BELT BUCKLES WERE IMPROPERLY MANUFACTURED. Built 2000-07-12 to 2000-07-31.
01V3800002001-12-13. SEAT BELTS:FRONT:BUCKLE ASSEMBLY. VEHICLE DESCRIPTION: CERTAIN SEDANS AND COUPES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." CERTAIN REAR SEAT BELT BUCKLES WERE IMPROPERLY MANUFACTURED. Built 2000-07-12 to 2000-07-31.
00V1840002000-07-14. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE REAR SUSPENSION LOWER ARMS AND/OR CONTROL ARMS COULD BREAK DUE TO IMPROPER WELDING. Built 2000-01-20 to 2000-02-29.
Canada: Transport Canada, as of 2026-10-19
20200152020-01-17. Airbag. Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
20200142020-01-17. Airbag. Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
20020632002-04-02. Airbag. On certain passenger vehicles a component in the inflator of some passenger air bag modules was not welded properly. As a result, the affected air bags may not deploy correctly in a crash, increasing the risk of injury to a front seat passenger. Correction: Dealers will replace the passenger air bag module.
20012952001-12-18. Seats And Restraints. Certain vehicles rear seat belt buckles have improperly manufactured lock bars. This could result in an inability to unlatch the belt as required in C.M.V.S.S. 209. Correction: Dealers will inspect and replace the rear seat belt buckles.
20001592000-07-25. Suspension. On certain vehicles, the rear suspension lower arm or control arm could break due to improper welding. This condition could result in extreme rear wheel toe and adversely affect vehicle handling and control. Correction: Vehicle will be inspected and suspension arms with an affected lot number will be replaced.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.