Service bulletins for the 2019 GMC Sierra
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
2009 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Backup camera are shown. Show all
| 19NA129 | 2021-07-06. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of a squeak and/or clunking noise coming from the rear of the vehicle. |
|---|---|
| 19NA076 | 2021-07-06. Service bulletin. BACK OVER PREVENTION. This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. |
| 20NA188 | 2021-05-24. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of Rear View Camera Image Flickers When Brake Lamps or Turn Signals are On. |
| 20NA048 | 2021-05-24. Service bulletin. BACK OVER PREVENTION; AIR BAGS. This technical bulletin provides repair information to correct a customer concern of hearing a rattle noise from driver or passenger seat belt. |
| PIP5653K | 2021-05-17. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates that engineering is investigating a repair for a chirp noise associated with the front axle assembly. |
| PIT5674B | 2021-05-17. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES; LANE DEPARTURE. This Preliminary information communicates that after installation of GM Accessory Performance Brake Pads it may be noticed the EBCM has set DTC(s) C116C 05 and/or C116B 05. There will be NO warning lights or messages displayed on the IPC/DIC. The GM Accessory Performance Brake Pads do not utilize the brake pad wear sensor. None. These DTC(s) do not cause any warning lights or messages to be displayed in the IPC/DIC. Per the GM Accessory Performance Brake installation instructions, the brake pad sensor connector should be capped with the supplied cap and the brake pad life system disabled in the DIC. |
| PIT5666B | 2021-05-17. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates an issue with a noise caused by the engine harness rubbing on the floor pan. Dealers are to reposition the harness to fix the noise. |
| PIT5744A | 2021-04-19. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body. |
| PIT5544D | 2021-04-19. Service bulletin. STEERING; BACK OVER PREVENTION; POWER TRAIN. This Preliminary information communicates information on a hydrauilc rush type noise from the power steering gear. This noise is a characteristic of the new Active Hydraulic Assist System RPO NV8 and no repairs should be made. The noise is most noticeable in the cab at idle, in park, with all accessories turned off. |
| PIT5386F | 2021-02-16. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| PIT5387J | 2021-02-16. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; BACK OVER PREVENTION:SOFTWARE; BACK OVER PREVENTION:DISPLAY FUNCTION. This Preliminary Information communication provides information to the technician how to repair vehicles that Instrument Panel Cluster, Radio, and Heater-Vent-Air Conditioning display blanks out, Bluetooth phone or Pandora connection dropped, the radio station or volume changes when operating the snow plow. Please advise the customer that engineering is aware of this concern and working on this issue. |
| PIT5386F | 2021-01-25. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| 20NA129 | 2020-09-28. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information for dealers/technicians on Rear View Camera Display Bright At Night. |
| PIT5744 | 2020-06-15. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body. |
| PIP5653F | 2020-06-15. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates that engineering has developed a repair for a chirp noise associated with the front axle assembly. |
| 150601002I | 2020-04-27. Service bulletin. BACK OVER PREVENTION; ENGINE. This technical bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated. |
| PIT5552D | 2020-04-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
| N192282480 | 2020-02-18. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; BACK OVER PREVENTION. Customer Satisfaction Program. Certain vehicles, may have several wires going to the body control module (BCM) damaged due to the installation/removal of the aftermarket LoJack alarm system from the vehicle. Dealer will inspect the wires going to the BCM and knee bolster for evidence that a LoJack alarm system was removed and repair as necessary. |
| N192275630 | 2020-02-10. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. N192275630 - Customer Satisfaction Program. Certain vehicles, may have a condition in which the electronic brake control module is less likely to activate the optional integrated brake assist. Normal braking capability functions as intended. Dealers are to reprogram the front camera module. |
| PIT5697 | 2019-08-12. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins." |
| 19NA076 | 2019-05-28. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY. This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. |
| PIE0507A | 2019-04-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This engineering informational bulletin is requesting information on experiencing a blue screen with service rear vision system message on the radio display when shifting into reverse or a black or blank rear camera image when viewing the 270-degree/360-degree Top Down surround view. |
| PIT5386E | 2019-04-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| PIE0507 | 2019-03-25. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This engineering informational bulletin is requesting information on experiencing a blue screen with a service rear vision system message on the radio display when shifting into reverse or a black or blank rear camera image when viewing the 270-degree/360-degree Top Down surround view. |
| PIT5552C | 2019-03-11. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communicates repair information for the rear vision camera or surround vision camera image being: - Yellow - Blurry - Distorted - Image scrolling - Image with NO gridlines - Screen is blue with gridlines - Screen is blue with Service Rear Vision System message |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.