Service bulletins for the 2005 GMC Sierra
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
796 on file from NHTSA, as of 2026-10-19.
About P0742 on the 2005 GMC Sierra: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: P0742 are shown. Show all
| PIP4290A | 2017-08-15. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicles that have a surge or stall when in gear at a stop. Technician will find Diagnostic Trouble Code P0742. Technician will need to isolate if the concern is transmission internal or external. Technician will need to disconnect the 20 way connector at the transmission (C-175 for model years 2001 ? 2007 and X-175 for model years 2008 ? 2013). On 2006 ? 2013 model years, using a fused jumper wire, connect terminal R of the automatic transmission inline 20-way connector to a known good ground. Technician can now run the vehicle to duplicate the concern. If the vehicle still stalls the concern has been isolated to the transmission. Inspect the Torque Converter Clutch solenoid and valve in the main valve body. If the vehicle does not stall inspect wiring between the Transmission Control Module and transmission if no concern is found swap the Transmission Control Module into a known good vehicle after clearing any Diagnostic Trouble Codes to determine if the concern follows the Transmission Control Module. |
|---|---|
| 08-07-30-001 | 2008-08-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 4L80E, MT1 AND 4L85E, MN8 SIMPLIFIED VALVE BODY RECONDITIONING INSTRUCTIONS, DTC P0741, P0742, P0752, P0752, P0756, P0757, P0894, HARSH OR DELAYED SHIFTS, SLIPS, NO DRIVE, NO REVERSE. *PE UPDATED 6/11/10. *PE |
| PIP-4290 | 2008-01-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). ENGINE SURGE OR STALL AT STOP AND/OR DTC P0742 POSSIBLE TCC APPLIED. EQUIPPED WITH ALLISON LCT1000 TRANSMISSION RPO M74 OR MW7. *NJ UPDATED 4/22/13. *PE |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.