WenmarOpen by Wenmar Pro

Service bulletins for the 2017 GMC Canyon

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1478 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
16NA2062022-05-31. Service bulletin. LANE DEPARTURE; ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR; BACK OVER PREVENTION. This service bulletin provides service information on a New Way to Look at NOx Sensor Readings and Exhaust Temperature During a DPF Regeneration or a Reductant System Malfunction Warning Service Bay Test.
20NA1972022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. This technical bulletin provides a procedure to inspect and repair the fuel pressure sensor if found the cause of the customers concern.
PIT5688D2022-05-16. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary information was released to advise of an alternate means of purging the air from the cooling system.
12-00-89-003B2022-05-10. Service bulletin. EQUIPMENT:ELECTRICAL; ENGINE. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
22-NA-0742022-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
22-NA-0092022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
21-NA-0362022-03-30. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT. This service bulletin advises the technician of a diagnostic test for a possible issue with a damaged OCV solenoid that may cause an oil leak and misfire, illuminating the MIL and setting DTCs P0300, P0302 and/or P0305.
PIT5479E2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.
PIT5668D2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. This preliminary information is to clarify a normal fluctuation of the temperature gauge.
PIP5632F2022-02-14. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP5628E2022-01-24. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
21NA2782021-12-27. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This service bulletin provides diagnostic strategy information to aid in diagnosing a Ticking, Tap or Rattle Noise from Engine with Possible Misfire, Malfunction Indicator Lamp (MIL) Illuminated.
19NA1532021-12-27. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal.
19NA1042021-12-27. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This service bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
19NA2562021-12-20. Service bulletin. ENGINE. This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
18NA0732021-12-20. Service bulletin. ENGINE. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
PIP58302021-12-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). This Preliminary information communicates concerns created by an aftermarket ECM calibration installed by fleet companies. The Fleet companies install aftermarket ECM calibrations to limit the vehicle speed to approximately 70 mph and reduce the over all power output. This calibration also reduces the engine idle speed and may induce a vibration at idle. If the vehicle needs to be returned to factory specifications, the ECM must be replaced and programmed.
21NA1472021-08-09. Service bulletin. ELECTRICAL SYSTEM:IGNITION:COIL:SPARK PLUGS; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING. This service bulletin provides a repair procedure to correct a customer concern of Coolant and/or Oil Leak, Malfunction Indicator Lamp (MIL) Illuminated?.
21NA1082021-07-19. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
19NA2562021-07-19. Service bulletin. ENGINE. This service bulletin provides diagnostic aid procedure to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
19NA0442021-07-19. Service bulletin. ELECTRICAL SYSTEM; ENGINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
18NA2012021-07-19. Service bulletin. ENGINE. This technical bulletin provides a procedure to seal the bedplate bolt #621 if found the cause of the oil leak.
21NA1082021-07-06. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
19NA2562021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic aid procedure to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
19NA0442021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.