WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Genesis G90

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

22 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
26-BD-009G TSB2026-09-26. Service bulletin. STRUCTURE:BODY. Some Genesis G90 (RS4) vehicles equipped with the power door system (PDS) may produce a clunking noise when the power door is manually opened or closed. This bulletin provides instructions to remove the PDS from the affected door and perform a partial replacement of the PDS spindle sub-assembly to address the noise condition.
26-HA-002G TSB2026-06-16. Service bulletin. ENGINE. Some Genesis vehicles (listed below) equipped with Lambda-III 3.5T-GDI engines may exhibit reduced heater performance due to engine coolant deposits clogging the heater core. This bulletin provides instructions to verify the concern and to replace the front and rear heater core (if applicable).
26-GI-002G TSB2026-06-06. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
26-AD-001G2026-03-30. Service bulletin. LANE DEPARTURE: WARNING; EXTERIOR LIGHTING; LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: WARNINGS. Some 2020MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
25-BD-012H TSB2025-11-12. Service bulletin. EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020G TSB2025-10-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-ST-001G TSB2025-10-01. Service bulletin. STEERING. Some vehicles may exhibit a rubbing type noise when turning the steering wheel. Follow the procedure in this TSB to inspect the source of the noise and, if necessary, replace the Steering Shaft Dust Cover.
25-BE-002G TSB2025-06-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater and updated by USB. The NAU website is https://update.genesis.com/US/EN/navigationUpdate. For certain models equipped with a relevant Genesis Connected Services (GCS) package, the software may be downloaded and applied via OTA update.
25-GI-009G2025-05-02. Service bulletin. ELECTRICAL SYSTEM. Certain Genesis vehicles may experience an inoperable horn from moisture or carbonization at the contact point. This bulletin provides a guide to inspect and replace the horns.
25-BE-003G DN2025-02-25. Service bulletin. ELECTRICAL SYSTEM. Genesis Motor America has noted that several vehicles were impacted by a telecommunications outage that occurred on Sunday, February 9th , resulting in the potential loss of connectivity or interruptions when attempting to use Connected Car Services functions. Voice Recognition, Sports Media, and Weather will not be available. Retailer stock and retailed vehicles are both affected. If a guest calls in and vehicle is experiencing issues related to Connected Car Services, please have them come into the retailer to assist with resetting the Connected Car Services Data Communication Unit (DCU) and utilize TSB 25-BE-003G posted on Genesis Tech Info.
25-BE-003G TSB2025-02-17. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Service (CCS) functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.