WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Genesis G70

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

47 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
26-EE-003G TSB2026-04-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.
26-01-007G TSB2026-01-27. Service campaign. ENGINE. Certain G70 (IK) vehicles equipped with the 2.0T-GDI engine may illuminate the Check Engine Light as a result of DTC P019100 (Fuel Rail Pressure Sensor Circuit Range/Performance). This bulletin provides instructions for updating the Engine Control Module (ECM).
26-01-007G DCS2026-01-27. Service campaign. ENGINE. Certain G70 (IK) vehicles equipped with the 2.0T-GDI engine may illuminate the Check Engine Light as a result of DTC P019100 (Fuel Rail Pressure Sensor Circuit Range/Performance).
23-EE-013G2023-12-22. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: • Internal short circuit • Battery deterioration • Malfunction of electronic parts • Insufficient battery charge • Normal battery • Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
23-AT-001G2023-04-04. Service bulletin. ENGINE AND ENGINE COOLING. When servicing a vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.