Recalls that may apply to the 2017 Freightliner Cascadia
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Brakes are shown.
| None found. |
| 2023051 | 2023-02-10. Brakes. Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply when the roll stability control system activates. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves. |
|---|---|
| 2022626 | 2022-11-01. Brakes. Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one wheel could fully apply during an adaptive cruise control braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the brake modulator valves. |
| 2020444 | 2020-09-18. Brakes. Issue: On certain trucks, the brake lights may stay on after the brake pedal is released. Safety Risk: Brake lights that stay on could cause other road users not to recognize when the truck is braking. This could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the 3-pin brake pressure switch with a 2-pin switch. A jumper harness will also be added. For vehicles equipped with a Cummins engine, the final repair has not yet been finalized. As an interim repair, the 3-pin brake pressure switch will be replaced with a new 3-pin brake pressure switch. A follow up notice will be sent to those owners when the final repair is available. |
| 2020305 | 2020-07-02. Brakes. Issue: On certain trucks, the brake modulator valves could corrode. As a result, the brakes on one side of the vehicle may be slow to release after an automatic braking event. If this happens, there could be a brake pull that can cause the truck to change direction. Note: This problem does not affect the regular service brakes. Safety Risk: A brake pull that causes the vehicle to change direction suddenly can increase the risk of crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the brake modulator valve. |
| 2017583 | 2017-11-28. Brakes. On certain vehicles with air brakes, after several hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal. If the brake lights do not illuminate, following road users would be unaware of the intent of the driver to slow the vehicle, which could increase the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America authorized service facilities will repair the brake light pressure switch. |
| 2017258 | 2017-05-12. Brakes. On certain vehicles built with NFD tandem rear axles, due to a manufacturing issue, the output shaft hardening may be too deep at the bolt hole for the yoke, causing the area to be brittle. The brittle condition may lead to fracture of the output shaft, which if the fracture were to happen suddenly at highway speed while descending a grade, the compression brake would be rendered ineffective and the shaft may become a road hazard, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the through shaft. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.