Recalls that may apply to the 1987 Freightliner C.O.E.
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 89V124000 | 1989-07-24. STEERING:GEAR BOX (OTHER THAN RACK AND PINION). THE STEERING GEAR MOUNTING BRACKET WELDS MAY CRACK UNDER CERTAIN STEERING LOAD CONDITIONS. Built 1978-12-01 to 1989-07-01. |
|---|---|
| 89V090000 | 1989-06-05. STRUCTURE:BODY. CORROSION OF THE GRABHANDLE AT ITS MOUNTING SURFACE MAY LEAD TO CRACKING OR LOSS OF STRENGTH. Built 1979-05-01 to 1987-07-01. |
| 88V160000 | 1988-10-11. STEERING:LINKAGES. STEERING ARM MAY FAIL IF USED ON EATON EFA12F4 FROM AXLE IN CONJUNCTION WITH ROSS HFB70 POWER STEERING GEAR. Built 1984-02-01 to 1988-09-01. |
| 87V091000 | 1987-06-15. STRUCTURE. BUCKLING OF THE TILT CYLINDERS MAY OCCUR WHILE LOWERING THE VEHICLES CAB DUE TO IMPROPER USE OF THE CAB TILT SYSTEM. Built 1985-11-01 to 1987-09-01. |
| 1987089 | 1987-08-18. Structure. IMPROPER USE OF THE CAB TILT SYSTEM MAY RESULT IN BUCKLING OF THE TILT CYLINDERS. THIS CAN OCCUR IF THE OPERATOR ATTEMPTS TO LOWER THE CAB BY CONTINUED PUMPING DOWN OF THE SYSTEM WITHOUT RELEASING THE SAFETY LATCH OR AFTER A TILT CYLINDER VELOCITY FUSE HAS LOCKED-UP. IF BUCKLING OCCURS, THE CAB MAY DROP TO ITS LOWERED POSITION. CORRECTION: 1 1/2" DIAMETER TILT CYLINDERS WILL BE REPLACED WITH 2" DIAMETER CYLINDERS. |
|---|
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.