Recalls that may apply to the 2025 Freightliner 114SD
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Steering are shown.
| 25V603000 | 2025-09-11. STEERING:CRITICAL FASTENERS; STEERING:LINKAGES:TIE ROD ASSEMBLY. Daimler Trucks North America, LLC (DTNA) is recalling certain 2024-2026 Western Star 47X, Freightliner Business Class M2, FCCC MT55G, 2025-2026 Western Star 49X, Freightliner Cascadia, Freightliner 114SD, FCCC MT45G, FCCC S2RV106, 2026 Thomas Built Buses Saf-T-Liner C2, Freightliner eCascadia, FCCC S2C106, and Freightliner 108SD vehicles. The tie rod castle nut and cotter pin may not be installed properly, which can result in a loss of vehicle steering control. Built from 2024-09-06. |
|---|---|
| 24V571000 | 2024-08-01. STEERING:LINKAGES:TIE ROD ASSEMBLY. Daimler Trucks North America, LLC (DTNA) is recalling certain 2025 Freightliner 108SD, 114SD, Business Class M2, Cascadia and Western Star 47X vehicles. The tie rod in the front axle may contain ball studs that have been incorrectly heat-treated, which can cause them to break, and result in tie rod failure. |
| 24V509000 | 2024-07-03. STEERING:LINKAGES:TIE ROD ASSEMBLY. Daimler Trucks North America, LLC (DTNA) is recalling certain 2025 Freightliner Cascadia, 114SD, Western Star 47X, and 49X transit buses equipped with Composolite EXS20 steerable lift axle suspension assemblies. The tie rod assembly ball stud could have been improperly heat treated and can fail. |
| 24V402000 | 2024-06-04. STEERING:LINKAGES:TIE ROD ASSEMBLY. Daimler Trucks North America, LLC (DTNA) is recalling certain 2025 Freightliner Cascadia, 108SD, 114SD, Business Class M2, Western Star 47X, 49X, Freightliner Custom Chassis S2RV 106, and S2C 106 transit buses, cabs, and chassis. The front axle tie rod ball joint studs may crack and break, which can result in tie rod separation. |
| 2025478 | 2025-09-11. Steering. Issue: On certain trucks, the castle nut securing the tie rod may not have been tightened properly and/or the cotter pin may be missing. As a result, the nut could loosen and separate. If this happens, there could be a loss of steering control. Safety Risk: A loss of steering control could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and advise you to take your truck to a DTNA authorized service facility to inspect and, if necessary, replace the tie rod. |
|---|---|
| 2024315 | 2024-06-04. Steering. Issue: On certain trucks, the ball stud on the tie rod(s) may not have been manufactured properly. As a result, the stud could fail and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify the owners by mail and advise you to take your truck to a DTNA authorized service facility to replace the tie rod assembly. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.