Recalls that may apply to the 2019 Freightliner 114SD
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Steering are shown.
| 23V105000 | 2023-02-20. STEERING:LINKAGES:DRAG:LINK:CONNECTION. Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Freightliner 108SD, 114SD, 122SD, Columbia, Coronado, Business Class M2, and 2020 Freightliner Cascadia vehicles. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm. |
|---|---|
| 18V913000 | 2018-12-19. SUSPENSION:FRONT:CONTROL ARM; STEERING:LINKAGES:TIE ROD ASSEMBLY; STEERING. Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts. Built 2017-02-10 to 2019-07-21. |
| 18V646000 | 2018-09-19. STEERING. Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, and Business Class M2 vehicles. The steering shaft assembly may have been installed incorrectly, which can cause a loss of connection between the steering wheel and the front wheels. Built 2017-12-01 to 2018-08-03. |
| 2023083 | 2023-02-20. Steering. Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary. |
|---|---|
| 2018518 | 2018-09-19. Steering. On certain trucks, the steering shaft assembly may not have been installed correctly. This could cause a loss of connection between the steering wheel and the front wheels, resulting in a loss of steering control and creating the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering shaft assembly and repair as necessary. Note: This is an expansion of recall 2018-386. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.