WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Ranger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

86 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
SSM 506702022-04-13. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; POWER TRAIN. Some 2021-2022 Ranger/Bronco vehicles equipped with a 2.3L EcoBoost engine built on or after 14-Dec-2021 and 2022 Explorer vehicles equipped with a 2.3L EcoBoost engine and built on or after 14-Dec-2021, may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P25B4 stored in the powertrain control module (PCM). To correct the condition, clear the DTC and road test the vehicle under load until the vehicle reaches operating temperature. If the DTC repeats, the turbocharger will need to be replaced. For claiming use causal part 6K682 and applicable labor times found in Section 09 of the Service Labor Time Standards (SLTS) Manual. If the DTC does not repeat, release the vehicle to the customer.
SSM 506562022-04-13. Service bulletin. SUSPENSION; POWER TRAIN. Some 2022 Ranger 4x4 vehicles built on 14-Feb-2022 and through 22-Mar-2022 may exhibit a vibration/boom noise above 50 mph (80 km/h) originating from the front of the vehicle. This may be due to an imbalanced front axle assembly. If the tires and drive shaft have been eliminated as the possible cause, inspect the front axle tag and locate the serial number. If the front axle serial number is between (XXXDRK 22041 XXXXX) and (XXXDRK 22075 XXXXX), replace the front axle with service part number KB3Z-3002-C. If not, refer to Workshop Manual, Section 100-04.
TSB 22-20512022-02-23. Service bulletin. POWER TRAIN. Some 2019-2022 Ranger vehicles may exhibit a shudder/vibration when accelerating from a stop. This may be due to an excessive rear axle pinion angle. To correct the condition, follow the Service Procedure steps to adjust the rear axle pinion angle.
TSB 22-20252022-02-16. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Some 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.