WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford Fiesta

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

110 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission control module are shown. Show all

Bulletins, newest first
SSM 469002018-01-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
SSM 463582017-03-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). 2011-2017 FIESTA AND 2012-2017 FOCUS SERVICE PIGTAIL FOR TRANSMISSION CONTROL MODULE CONNECTOR C1750A IS AVAILABLE. IF REPAIRS ARE NEEDED USE PART NUMBER FU2Z-14S411-VA. REPLACEMENT OF WIRING HARNESS 12A581 IS NO LONGER REQUIRED WHEN THIS CONNECTOR NEEDS SERVICING.
TSB 17-00032017-03-15. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME 2016-2017 FIESTA VEHICLES EQUIPPED WITH A 1.0L GASOLINE TURBO DIRECT INJECTION (GDTI) ENGINE AND BUILT ON OR BEFORE 6-JAN-2017 MAY EXHIBIT AN ILLUMINATED MIL WITH DTC P04DB (CRANKCASE VENTILATION SYSTEM DISCONNECTED) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
SSM 459352017-02-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME 2014 - 2016 FIESTA EQUIPPED WITH 1.6L ENGINE MAY EXHIBIT A POWERTRAIN MALFUNCTION (WRENCH)/SERVICE WARNING INDICATOR ILLUMINATED WITH NO DTCS. THE POWERTRAIN MALFUNCTION (WRENCH)/SERVICE WARNING INDICATOR MAY BE ILLUMINATED TO INDICATE AN ENGINE OIL CHANGE IS DUE. IF NO DIAGNOSTIC TROUBLE CODES (DTCS) ARE PRESENT IN THE POWERTRAIN CONTROL MODULE (PCM) THEN PERFORM APPROPRIATE SCHEDULED MAINTENANCE PER THE SCHEDULED MAINTENANCE GUIDE. AFTER MAINTENANCE IS COMPLETED TURN OFF THE WRENCH LIGHT BY PERFORMING THE SERVICE WARNING INDICATOR RESET PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 413-01 - GENERAL PROCEDURES - RESET THE SERVICE WARNING INDICATOR. USE CAUSAL PART 4273 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL. MONITOR OASIS FOR FURTHER UPDATES.
SSM-458152016-08-30. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). AIR CONDITIONING (A/C) INOPERATIVE - DIAGNOSTIC TROUBLE CODE (DTC) P0645

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.