WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Ford F-550

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

332 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
TSB18-21332018-07-23. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Some 2017-2018 F-Super Duty vehicles equipped with a 6.7L diesel engine built on or before 15-Mar-2018 may exhibit an illuminated WIF indicator with DTCs P1140, P2266 and/or P2269 stored in the powertrain control module (PCM). This may be due to water intrusion into connector C3080 at the WIF sensor. Follow the Service Procedure steps to correct the condition.
SSM 469462018-01-29. Service bulletin. STRUCTURE; EQUIPMENT; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Some 2015-2018 F-150, 2017-2018 F-Super Duty, 2018 Expedition/Navigator vehicles equipped with a vista roof opening panel may exhibit binding while opening or closing of the movable glass panel. The roof opening panel glass brackets are available for service. Both brackets must be replaced, FL3Z-1651070-A right side and FL3Z-1651071-A left side. Refer to Workshop Manual (WSM), Section 501-17 for removal and installation procedure. For claiming, use causal part 1651070 and applicable labor operations in section 12 of the service labor time standards (SLTS) manual.
SSM 461982017-03-20. Service bulletin. STRUCTURE:BODY. SOME 2017 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L ENGINE AND BUILT ON OR BEFORE 03-NOV-2016 MAY EXHIBIT A LEAK FROM THE TRANSMISSION FLUID COOLER TUBES. THIS MAY BE DUE TO POOR ALIGNMENT OF THE COOLER TUBES WITH THE COOLER TUBE PORTS ON THE TRANSMISSION AND/OR IMPROPER HOLD DOWN PLATE ALIGNMENT. WHEN INSTALLING THESE TUBES, VISUALLY VERIFY THAT EACH TUBE IS FULLY INSERTED INTO THE TRANSMISSION AND ARE NOT OFFSET TO ONE SIDE OF THE COOLER PORT BORE BEFORE INSTALLING THE HOLD DOWN PLATE. WHEN INSTALLING THE HOLD DOWN PLATE, USE A NEW BOLT PART NUMBER W715131-S437 WITH WASHER W718565-S437U INSTALLED OVER THE BOLT BETWEEN THE PLATE AND THE TRANSMISSION. TORQUE TO 25 NM (18 LB-FT). THIS WILL PROVIDE PROPER PLATE TO COOLER TUBE ALIGNMENT AND CLAMPING.
SSM 463602017-03-17. Service bulletin. EQUIPMENT:ELECTRICAL; STRUCTURE:BODY. ON 2017 F-SUPER DUTY, THE INSTALLATION AND CONFIGURATION OF THE FACTORY SUPPLIED UPFITTER AUXILIARY SWITCHES AND/OR THE UPFITTER INTERFACE MODULE COMPONENTS CANNOT BE ADDED TO A VEHICLE THAT WAS NOT BUILT WITH THIS OPTION AT PRODUCTION. CHASSIS CABS CONFIGURATIONS WILL ONLY HAVE THE UPFITTER SWITCHES AS STANDARD EQUIPMENT. FURTHER INFORMATION CAN BE FOUND ON THE TRUCK BODY BUILDER ADVISORY SERVICE (BBAS) WEBSITE, FOUND BY CLICKING THE LINK AT THE BOTTOM OF THE WEBPAGE AT HTTPS://WWW.FLEET.FORD.COM. ONCE AT BBAS WEBSITE, CLICK ON BULLETINS, AND REFER TO PUBLISHED QUALIFIED VEHICLE MODIFIER (QVM) BULLETIN FOR 2017 F-SUPER DUTY UPFITTER AUXILIARY SWITCHES.
SSM 463592017-03-17. Service bulletin. STRUCTURE:BODY. SOME 2017 F-SUPER DUTY VEHICLES BUILT ON OR BEFORE 23-JAN-2017 MAY EXHIBIT A WATER LEAK INTO THE PASSENGER COMPARTMENT DUE TO POOR SEALING OF THE CAB MARKER LAMP GASKET. IF THE WATER LEAK IS DETERMINED TO BE FROM THE CAB MARKER LAMP, A REVISED CAB MARKER LAMP ASSEMBLY IS AVAILABLE THAT HAS ADHESIVE ON THE GASKET TO IMPROVE SEALING. WHEN INSTALLING THE ROOF MARKER LAMP, REFER TO WORKSHOP MANUAL (WSM), SECTION 417-01 FOR REVISED INSTALLATION PROCEDURE.
SSM 462502017-03-10. Service bulletin. STRUCTURE:BODY. SOME 2017 F-SUPER DUTY CHASSIS CAB AND PICKUP BOX DELETE VEHICLES BUILT ON OR BEFORE 27-SEP-2016 MAY EXHIBIT AN INSTRUMENT PANEL CLUSTER (IPC) TURN SIGNAL INDICATOR FLASHING FAST WITH NO INOPERATIVE TURN SIGNAL LAMPS. THIS MAY BE DUE TO THE BODY CONTROL MODULE (BCM) NOT RECOGNIZING THE USAGE OF MODIFIED TURN SIGNAL LIGHTING WHICH DRAWS LOWER CURRENT AND IS DETECTED AS AN INOPERATIVE TURN SIGNAL LAMP. TO CORRECT THIS CONCERN, USE INTEGRATED DIAGNOSTIC SYSTEM (IDS) SERVICE TOOL VERSION 103.03 OR LATER TO CONFIGURE THE FRONT AND REAR TURN LAMP OUTAGE SETTINGS AS REQUIRED. THESE SETTINGS CAN BE FOUND UNDER TOOLBOX > MODULE PROGRAMMING > PROGRAMMABLE PARAMETERS > EXTERIOR LIGHTING. USE CAUSAL PART 15604 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
TSB 16-01642017-03-10. Service bulletin. STRUCTURE. SOME 2017 F-SUPER DUTY VEHICLES BUILT AT THE OHIO ASSEMBLY PLANT ON OR BEFORE 24-OCT-2016 MAY EXHIBIT A LOOSE RADIATOR GRILLE AND/OR SQUEAK RATTLE FROM RADIATOR GRILLE AREA. THIS MAY BE DUE TO IMPROPER TORQUE OF THE RADIATOR GRILLE REINFORCEMENT BOLTS. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
SSM 460262017-02-23. Service bulletin. STRUCTURE; EQUIPMENT. SOME 2017 F-SUPER DUTY VEHICLES MAY BE EQUIPPED WITH A NEW UPFITTER MODULE, DESIGNATED AS GENERIC FUNCTION MODULE 2 (GFM2), WHICH MAY REQUIRE ADDITIONAL PROGRAMMING BY THE UPFITTER IF THE MODULE IS REPLACED. THIS DATA MUST BE OBTAINED DIRECTLY FROM THE UPFITTER COMPANY AND CONTACT INFORMATION SHOULD BE OBTAINED FROM THE CUSTOMER OR MAY BE FOUND IN INFORMATION PLACED ON THE VEHICLE BY THE UPFITTER, TYPICALLY IN THE DOOR OPENING.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.